Reply to Thread

and congrads on the job I remember the excitement when I landed my first legit company!

as stated most of the bigger expensive tools the company should supply, my experience with that has been that it is bounced around from tech to tech because there isnt one for everybody, so unless you got a razor sharp memory youll find yourself on a job needed the tool you had yesterday that got took off your truck, or you turned in and forgot today. The worst thing ever standing there going F&%$, I already made contact with customer, started working and now got to call for someone to bring it to you or pack up and go get it. Im buying all my own equipment, from little to big, and yes ive been broke for the last few months and still got alot more to go....

Originally Posted by WMG

Do you know what colors of thermostat wire are commonly used for? White, red, blue, green, yellow, orange? Might be a good thing to memorize

My last private sector employer had techs that wired without any thought to color code. So I would say it is most important to note what colors are connected at one end to be sure that they are connected properly at the other.

Originally Posted by Ctuck

Well I got the job! I start Monday. My employer told me as long as it didn't interfere with work and pertained to what I wanted to do, that he would reimburse me for classes taken.

Do you know what colors of thermostat wire are commonly used for? White, red, blue, green, yellow, orange? Might be a good thing to memorize

Originally Posted by Ctuck

Well I got the job! I start Monday. My employer told me as long as it didn't interfere with work and pertained to what I wanted to do, that he would reimburse me for classes taken.

Congrats, hope it works out for you.

Well I got the job! I start Monday. My employer told me as long as it didn't interfere with work and pertained to what I wanted to do, that he would reimburse me for classes taken.

I use a 5 gallon bucket with a Huskey Bucket jockey. Before I leave every job I make sure every tool is present and accounted for. A/C tools are way too expensive to be leaving in the attic. I would definetly acquire the following tools before going to work on the first day: LED headlamp, 1/4" and 5/16" nut drivers, Multimeter with amp clamp, Flathead and phillips head screwdrivers, wirestrippers and snips, electric drill.

And warn ya friends,family, girlfriends etc, not to be texting or calling during work hours unless it very important. I had one just this week, everytime I sent him after something at the truck he was on the phone from time he leftward until he came back.. Walking slow, on Facebook, or texting, and then he not remember half what to get.
I don't know how old u are, but make sure you pull ur pants up. You will be bending and squatting a lot, so invest in a belt...
And get a haircut before you start. I went and got mine during lunch the other day, and I had this same helper with me. When the lady finished mine I had him get one. That mess all down in his eyes, he said it been bout 3 months since his last one... Well since I told her how to cut it, I did pay for it... .

Good luck on the interview. Show up ready to work and eager to learn, maybe they'll throw you in to ride along on the spot.

Xceltech...thanks for the info. That's what I had in mind, to put some money aside and start getting some quality stuff. Good idea as well about not getting digis right away so that I can better myself with the superheat and sub cool calculations. Interview on Monday!

Buy the Fieldpeice HS36. They have everything you need and are good sturdy product. Learn how to use the meter properly. I find more electrical problems then I do refrigerant problems. Spend the 50 bucks for the yellow jacket ball valves to go on the end of your hoses. I can't even begin to explain in words how useful they those little ball valves are. Make sure when you get hoses you get some that are at least 6ft.

You don't need 500 dollar digital gauges right out of the gate and I would suggest for a starter it will gimp your growth.

If you get digital gauges first, you wont have a set of analog backups, you wont gain that repetitive experience doing superheat and sub-cooling calculation, cause when you don't have a set of digital gauges you will be lost. Plus, the new guy always ends up breaking expensive tools until they learn how important their tools are and how to properly take care of them.

Your company should supply Vacuum pump, Recover unit, Recovery tank, Weight Scale, Micron gauge, Nitrogen regulator and tank, and Torch set, however, you need a savings account that is separate from all the rest of your money.

You should plan on sticking 75-100 bucks a paycheck in it. I learned a long time ago that companies buy cheap and cheap usually doesn't get the job done, without some complication.

Plan on buying one really expensive item to make your job faster or easier after the first year then every 6 months following. Start with things like good power tools sets. I like Makita 18v hammer drill and impact set. Talk to the people you work with. What is their most useful tool? Why? What do they want they can't get and why?

I just bought some YJ ball valve hoses today. I was wondering why I felt so Dirty now

Originally Posted by Pascone10

The best thing you can do is show up 15 mins early to work and be ready to work.. .

And leave that damn cell phone OFF

Originally Posted by jtrammel

I wouldn't leave my guages hooked up on a system overnight. I'd be worried they wouldn't be there the next day, even if they were a cheap set you're looking at 100-200 bucks with hoses. I have a 6" hose with analogue guage on it that I have left on for overnight pressure testing.

I agree but it's more feasible that you may have to leave a set of gauges on a unit overnight versus leaving a meter. Plus a meter will save you from injury by alerting you to a unit being electrified.

I wouldn't leave my guages hooked up on a system overnight. I'd be worried they wouldn't be there the next day, even if they were a cheap set you're looking at 100-200 bucks with hoses. I have a 6" hose with analogue guage on it that I have left on for overnight pressure testing.

Originally Posted by 2sac

Manifolds are cheap. They rape you on the hoses.

x3

I'm going to tell you what I told my students. Everyone wants the most awesome gauges but here's the thing. Let's say you're on a compressor replacement and the tech you're working with has been told to leave a pressure test on overnight. It so happens you used your gauges for that job and tomorrow another team is going back to finish the job. Now your gauges are banging around in someone else's truck. Good thing you got the hot sh8t gauges, right? Spend your money on a meter, it will save your life. I recommend Fieldpiece.

Originally Posted by Ctuck

Thanks for the info guys. The employer called me 2weeks ago and talked with me for about 30mins and told me at the beginning of the call to be HONEST, which I was. I have only been in school for less than a year(4 basic classes) and told him all this. He said he did not expect me to know everything and that they would probably have to re-teach me things their way. He told me to call when I finished up with school and we would meet and talk. He even sent an email after the initial call saying how much enjoyed talking with me. So fingers crossed!

Wow. Im impressed with the sounds of your possible employer. Sounds like a good opportunity. Lets us know how you make out.

Thanks for the info guys. The employer called me 2weeks ago and talked with me for about 30mins and told me at the beginning of the call to be HONEST, which I was. I have only been in school for less than a year(4 basic classes) and told him all this. He said he did not expect me to know everything and that they would probably have to re-teach me things their way. He told me to call when I finished up with school and we would meet and talk. He even sent an email after the initial call saying how much enjoyed talking with me. So fingers crossed!

Originally Posted by 2sac

Manifolds are cheap. They rape you on the hoses.

X2

Originally Posted by jtrammel

I'd reccomend getting a meter and guages. Don't buy cheap tools because they don't work as well and don't last as long. Fieldpiece makes good affordable meters as does uei. Guages (analogue= yellow jacket digital=digicool ak900). Klein, Malco, knipex, channelock, rothenberger, Lennox, vaco, ridgid, etc.

Manifolds are cheap. They rape you on the hoses.