Post a reply to the thread: Trane CH530 Screen lockup
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
I have never seen one lock up, I have seen not work right, and contrast mess up but never 1 locked up.
Originally Posted by OpenDrive When it locked up, the keys on the screen locked up. It would stay running, and tech view would show normal operation. Usually in the ckt 2 comp screen. Good now! Are you saying that you can see the buttons, or keys? That you can see them, but they won't respond to your touch? You're not talking about the numbers that are arranged like a keypad, are you? I just want to be clear in understanding what you're experiencing. I have never seen one locked up, nor have I ever talked face to face with anyone who has ever seen this.
Originally Posted by R123 I'm wondering the same thing because a locked up display is unusual and a locked up replacement is almost unheard of..... Not according to my Trane rep.
When it locked up, the keys on the screen locked up. It would stay running, and tech view would show normal operation. Usually in the ckt 2 comp screen. Good now!
Originally Posted by R123 I'm wondering the same thing because a locked up display is unusual and a locked up replacement is almost unheard of..... Me thinks someone has a bug on their PC which is getting loaded with the software and screwing things up ??
Originally Posted by Nuclrchiller OpenDrive, when you say the display has locked up, just what are you seeing? What are the symptoms? Is the screen displaying anything at all? I'm wondering the same thing because a locked up display is unusual and a locked up replacement is almost unheard of.....
OpenDrive, when you say the display has locked up, just what are you seeing? What are the symptoms? Is the screen displaying anything at all?
Update. Bad display. 2nd bad new display. 3rd time great!
Thanks super,. ,. I have never ran across a machine that has locked up 530,. Is the data recorder (assuming) it is installed in the dynaview, not a separate board,. And why a last resort , if the 530 is froze and has to be reset and change the machine software and reload to the correct software, y not choose the secret , is or has there been problems by doing this? Just wondering ,
Just got pro membership. Can you post this in the pro forum?
I did not think it to be a good idea!!!
Originally Posted by supertek65 i do not know if i should post it here but there is a trane secret to reboot the dynaview! then of course you will have to do a little data entry!!!!!!!!!!!!!! or should i say menu selecting? I know the secret your talking about and it shouldn't be posted in the open forum. That should be used for a last resort. Also, it only works on the later versions of the DynaView that has the data recorder.
i PMd it to you MW!!!!!!!!
LMAO!!!!!!!!!!!!!!!!!!!!! is your email address in profile?????????????? Originally Posted by milkyway Yea,. Turn the power off and on , Jk I wanna know the secret.
Originally Posted by supertek65 i do not know if i should post it here but there is a trane secret to reboot the dynaview! then of course you will have to do a little data entry!!!!!!!!!!!!!! or should i say menu selecting? Yea,. Turn the power off and on , Jk I wanna know the secret.
i do not know if i should post it here but there is a trane secret to reboot the dynaview! then of course you will have to do a little data entry!!!!!!!!!!!!!! or should i say menu selecting?
Thanks for the info. Sounds logical to me. I'll give it a shot
Originally Posted by Healey Nut Heres a better idea . Load a different type of chiller software into the dynaview , boot it up and you will get a configuration error and all kinds of goofy alarms . then reload the correct RTAC software and you should be good . Reloading old software will not eliminate the bug in the software , loading completely different (incorrect) software will, it erases all the memory and gives you a fresh start . X2
Originally Posted by CV_Geardrive Hi, Try to download a previous version of RTAC software. Regards, CV Heres a better idea . Load a different type of chiller software into the dynaview , boot it up and you will get a configuration error and all kinds of goofy alarms . then reload the correct RTAC software and you should be good . Reloading old software will not eliminate the bug in the software , loading completely different (incorrect) software will, it erases all the memory and gives you a fresh start .
Hi, Try to download a previous version of RTAC software. Regards, CV
Forum Rules
