Reply to Thread

Originally Posted by Phase Loss

The Pump & Dump was popular a few years ago...but I'm starting to become a family man.

lol

Originally Posted by icemeister

I suppose "Pump & Dump" originally got its name from back when many water-cooled refrigeration systems were of the open loop variety where either well water or city water cooling was a once-through process. For a lot of years now this has been simply too costly or outright prohibited, so most water-cooled units are on a closed loop setup with a cooling tower.

It reminds me of when my father installed a number of commercial A/C systems in New Hampshire using chilled water coils and city water...which came from wells and was a constant 50ºF all year round...and all it went to directly to the sewer. They worked pretty well actually. When they started metering the water usage in the 1960's, he got to install cooling towers or air-cooled condensers.

That's exactly what it is...city water thru the condenser and down the drain!!! We have 10 coolers and 5 freezers still on this setup!

Originally Posted by 2sac

What about the bumper dumper? http://www.bumperdumper.com/bumper2.htm

I nominate for the best post of the day..

Bumper Dumper. ****ing golden.

Originally Posted by 2sac

What about the bumper dumper? http://www.bumperdumper.com/bumper2.htm

What about the bumper dumper? http://www.bumperdumper.com/bumper2.htm

The Pump & Dump was popular a few years ago...but I'm starting to become a family man.

Originally Posted by ryan1088

We have quite a few of these and I was always told to charge to clear the glass. Make sure your water regulating valve is set properly and it'll be all good.

Ice- our old timer calls them a "pump and dump" system. Have you guys ever heard that?

I suppose "Pump & Dump" originally got its name from back when many water-cooled refrigeration systems were of the open loop variety where either well water or city water cooling was a once-through process. For a lot of years now this has been simply too costly or outright prohibited, so most water-cooled units are on a closed loop setup with a cooling tower.

It reminds me of when my father installed a number of commercial A/C systems in New Hampshire using chilled water coils and city water...which came from wells and was a constant 50ºF all year round...and all it went to directly to the sewer. They worked pretty well actually. When they started metering the water usage in the 1960's, he got to install cooling towers or air-cooled condensers.

We have quite a few of these and I was always told to charge to clear the glass. Make sure your water regulating valve is set properly and it'll be all good.

Ice- our old timer calls them a "pump and dump" system. Have you guys ever heard that?

From the description this sounds like a WJWL water-cooled condensing unit, which has a shell & tube condenser...referred to in the old days as a condenser/receiver.

The refrigerant flows through the shell and the water through the tubes so there a significant liquid storage capacity with these condensers. I found some specs which indicate that this unit would have a pumpdown capacity of about 42 lbs...not bad for a 3 HP unit.

Here's a drawing:

Attachment 325701

Originally Posted by Dchappa21

You ever tried charging a system with no receiver to a full glass???? It's never work well for me unless the condenser is oversized. They always spike the discharge pressure when the valve starts to throttle.

I may have, who knows? Which is why I said use it as a starting point and adjust as necessary. I normally don't see sight glasses on units without receivers.

Originally Posted by 2sac

Not if it's not a pumpdown. Might just be using a t-stat to control compressor. A clear glass would be a starting point. SC & SH would be the proper way to go. Make sure the water regulating valve is set properly.

You ever tried charging a system with no receiver to a full glass???? It's never work well for me unless the condenser is oversized. They always spike the discharge pressure when the valve starts to throttle.

Originally Posted by Phase Loss

I bet the condenser is also the receiver.

so the reciever is the vessel and the condenser water is basicly a coil in the vessel condensing hot gas into liquid and storage before entering liquid line and so on..

Originally Posted by cannedheat

looks like discharge line off compressor goes to vessel under compressor then liquid line exits vessel to drier and sight glass then to evap to freezer. vessel has water line going into it with water regulater. regulator has cap tube that senses pressure via discharge port, then another line exiting vessel dumping water to open sight drain. dont see any receiver.

Someone correct me if I am wrong, but I believe based on the description this is a shell and coil type water cooled condenser and that the shell doubles as a receiver in this setup?

have picture on iphone not sure how to post sorry

looks like discharge line off compressor goes to vessel under compressor then liquid line exits vessel to drier and sight glass then to evap to freezer. vessel has water line going into it with water regulater. regulator has cap tube that senses pressure via discharge port, then another line exiting vessel dumping water to open sight drain. dont see any receiver.

I bet the condenser is also the receiver.

Yeah, I bet there is a receiver under the unit.

Yeaa full sight glass is a good start but then after you notice the bubbles just starting to disappear, start doing SH and SC. You don't want to over charge..

You've got a receiver. Check under the condensing unit