Reply to Thread

I too am looking for the XPSI Manual. I would like to leave it for the new owners as we are shuttering our facility and have removed our BMS system for one of our buildings from our company servers that had the Wonderware Software on it which ran our BMS. Now we just have a laptop with XPSI on it to change the setpoints.

My email is in my profile...thanks in advance if you can help...

I am looking for the microzone II manuals also. Did you ever get a copy if so could you provide me a copy.

Thanks

I too need XPSI and programming manuals.
Any assistance is greatly appreciated.
My email is in my profile.

Thank you

XPS

[QUOTE=Carlos Rojas;14995831]Hello! And happy New Year to everyone.
I do have all of the NETWORK 8000 literature. If somebody needs anything just let me know.
I need the latest version of XPSI



I could use a copy of the MZ2 & PEM programming, operator manuals as well. Email in Profile Thanks

I could use a copy of the MZ2 & PEM programming, operator manuals as well. Email is in my profile if you can spare the time. Thanks.

I am working on Network 8000 system with a GCM with 14 MZII controllers.

I read several of your posts on HVAC-Talk.com and could really use the programmers, operators manuals for both.

Thank you for any help that you can give me.

Richard

I would like a copy also if you can spare?

OK. I'll look you up when I get to the point of actually being ready to use the manuals.

Originally Posted by Carlos Rojas

I cannot access your profile.
I do have all the manuals (GCM/LCM programming, MZ2 & PEM programming, operator manuals, etc.)(hard copies though) and can make copies or scan them if you need any.

I cannot access your profile.
I do have all the manuals (GCM/LCM programming, MZ2 & PEM programming, operator manuals, etc.)(hard copies though) and can make copies or scan them if you need any.

Hi Carlos,

Please contact me offline. I would like to discuss what literature you have and what format it is available in. My contact information is in my profile.

Originally Posted by Carlos Rojas

Hello! And happy New Year to everyone.
I do have all of the NETWORK 8000 literature. If somebody needs anything just let me know.
I need the latest version of XPSI.

Hello! And happy New Year to everyone.
I do have all of the NETWORK 8000 literature. If somebody needs anything just let me know.
I need the latest version of XPSI.

I am working on a school, with a network 8000 and MZ2 controllers. The original wise terminal was left turned on for years and has given up the ghost.

I would like a copy of XPSI or maybe someone knows the pin configuration of the serial connector on the MZ2 so I can make a cable to connect directly to them.

I too need XPSI
my email is in my profile.

Please and thanks

or my username at gmail

Originally Posted by shovelhead

I think that I started this thread several years ago LOL! Does anyone have literature for the GCM and the MZII controllers that they will share? I have integrated several MZII controllers to the Niagara Framework with great success using XPSI to find the points that were coming from the GCM. I have the XPSI software if anyone needs it, as well as PCM and UPCM edit.

Please my friend, could you send me a copy of xpsi? May I give you my email?

I also need xpsi.
I have searched high and low and still coming up short. Any help would be greatly appreciated.
Thanks!

I need XPSI!

Hey shovelhead!
Nice to hear you have xpsi! How can I get it from you?
Thanks!

I think that I started this thread several years ago LOL! Does anyone have literature for the GCM and the MZII controllers that they will share? I have integrated several MZII controllers to the Niagara Framework with great success using XPSI to find the points that were coming from the GCM. I have the XPSI software if anyone needs it, as well as PCM and UPCM edit.

I have MicroFlo II manual. I need Microzone II manual

I have MicroFlo II programmer's manual. I need Microzone II programmer's manual. Maybe someone could trade with me, or just provide the one I need?

We are having trouble with controlling the humidifiers and temperatures so I want to see if I can figure it out. Thanks.

Originally Posted by mujtaba12

Hey brother just give me ur email i will send u the manuals and I have its programs too..i will send u that also which will help you in understanding a bit more

Hi there, friend.
Im new in this forum and I also need the xpsi manual and software, because I lost all files we had in my job. I dont use it a long time ago.
If you could send it to my email, that would be great.
Please? Thanks!

MZII engineering manual & S/W

Can someone please send me MZII manual? My email is on my profile. Thanks.