Reply to Thread

Originally posted by square2round
Is this a remodel or a change out?

Change-out

I know you guys up North tend to do things different, but here the norm is to build a platform for the equipment in the attic. We never had vibration problems. I think the wood dampens the viration a little. If vibration was a problem vibration isolaters would be used.

Its a 80% vs with a r/a chase you barely can here it in the living area.

There is a drain on the emergency pan you can't see it in the pictures. It's on the backside.

We form and pour the slabs ourselves. I don't like the plastic ones.

nice install, looks good. are you not worried about noise or vibrations since the unit is set on the ceiling joists and not hung from the roof joists ?

Is this a remodel or a change out?

We install float switches, but we also run a drain line from the pan to the outside.

No need for a drain on the pan he's got a fload switch in there.

No drain on the overflow pan? I don't see one. And is that duplex the permanent wiring for the furnace?

Sure glad you removed that Old gas valve first I have seen, UGLY Great install...

I like that permanent pad for the OD unit.

That pvc drain looks like it might get crushed when servicing the unit though.

I've never seen that type of venting before,almost resembles a liner.

Go here http://www.mtlfab.com/metalfab/content/view/full/381 and click on B-Flex Brochure.

Originally posted by souper phly
Who makes it? ya got a linky for the mfr

Not sure, but I'll find out tommorrow and repost.

Who makes it? ya got a linky for the mfr

Originally posted by souper phly
whats that flexi-flue thing-a-ma-jig there? Is it double wall?

Yes it is double wall. It has also been approved here in LA.

It cost about half the cost of using 3 adjustable 90's.

There great for retrofit.

[Edited by bluetooth751 on 11-10-2005 at 09:39 PM]

whats that flexi-flue thing-a-ma-jig there? Is it double wall?

Here we go

Bryant Evolution system installation

Originally posted by bluetooth751

Originally posted by square2round
I don't think link's going to work. If it's in your documents, you'll be the only one able to see it. You need to upload the picture first.

how you post the pics exactly?

Read this:

http://hvac-talk.com/vbb/showthread.php?threadid=22507

Originally posted by square2round
I don't think link's going to work. If it's in your documents, you'll be the only one able to see it. You need to upload the picture first.

how you post the pics exactly?

Wow, look at that boulder, that's a nice boulder.

I don't think link's going to work. If it's in your documents, you'll be the only one able to see it. You need to upload the picture first.

img[C:\Documents and Settings\Doug's Refrigeration\My Documents\My Pictures\Burn to CD\2005-11-09]img