Post a reply to the thread: YAEP CHILLER AGAIN
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
Originally Posted by MOTASIM THE CHILLER FAILED HIGH AMBIENT ALTHOGH ITS NEW AND ALL VALUE ACTUALY CORRECT If the chiller is new, as you said, it should be still under warranty of JCI/York. Sorry to say that, but the only thing you have to do in this case is, to call Johnson service office in your area. If everything is ok, the unit should not trip! But why have you replaced the main board then? Have you done it on your own and warranty is now void? I suspect as already said, that you missed to program the values which are factory set. What happened to the old board? Do you still have it? If you do want us to help you, you should try to answer the questions that we raise.
YAEP LOADING CHART YAEP CAN ANY ONE GIVE ME THE CORRECT VALUE AND HOW TO PROGRAMME IT IN THE CHILLER Loading Charts - 2 System Units ITS IN PAGE 64 IN THE MANUAL WICH IM ATTACHED IT I MEAN CAN YOU GIVE ME THE DISCRIPTION FOR THIS PAGE AND HOW TO APPLY IT IN THE CHILLER THANXXXX
YAEP LOADING CHART
YAEP is an aircooled recip chiller with PC compressors fitted. It is build in Guangzhou, China for high ambient applications. What does "failed high ambient" mean? Did it trip on high discharge pressure? If yes, on the electronic setting or on the mechanical hp´s? What was the condenser air inlet temperature when the chiller triped, did you have short circuit air flow, checked for refrigerant overcharge? The chiller should not trip on 37°C ambient at all! Have you checked correct fan rotation, operation. What is the setting for the condenser pressure control, electronic hp cut out, high ambient temperature cut out? I suspect, that you failed programing all values when you replaced the main board. Is a 031-01095-002 board fitted?
As far as I know, York got 2 factory in China, one is in Wuxi for water cooled chiller and another on is in Guangzhou for air-cooled chiller. Why dont refer to the China office?
its york but made in china (yaep) Originally Posted by Michael Shen Hey, please find attached YCAV parts manual, which I think you might quote a wrong model#. Y=york;C/E=Chiller;A=air cooled;the 4th character is for compressor type. thanx Micheal Shen but the model is correct its york but made in china (johnson controls ) thanx again
its york but made in china (yaep)
YCAV parts manual Hey, please find attached YCAV parts manual, which I think you might quote a wrong model#. Y=york;C/E=Chiller;A=air cooled;the 4th character is for compressor type.
YCAV parts manual
YAEP CHILLER AGAIN PLEASE ANY ONE HAVE A PARTS CATALOGE FOR YAEP CHILLER AND PLEASE ANSWER ME ABOUT THE PROBLEM IN THE BELOW THREAD THE CHILLER FAILED HIGH AMBIENT ALTHOGH ITS NEW AND ALL VALUE ACTUALY CORRECT I WAIT THE ANSWER THANX ALOT
YAEP CHILLER AGAIN
Forum Rules