Reply to Thread

Thanks guys. We will give it another go around and see what happens.

[QUOTE=kontrolthis;14613711]On a similar subject, has anyone figured a work around to get PCT through an FX to work when it's at a remote site? Locally we are good, but anytime we go remote it's not accessible. (With pcg controllers bacnet routing enabled..... of course)

The IP port in the bacnet network needs to be enabled and be sure you know the network number of the trunk of the device you want to see....

Originally Posted by kontrolthis

On a similar subject, has anyone figured a work around to get PCT through an FX to work when it's at a remote site? Locally we are good, but anytime we go remote it's not accessible. (With pcg controllers bacnet routing enabled..... of course)

Sorry for the hijack.

Yeah forward port 47808

On a similar subject, has anyone figured a work around to get PCT through an FX to work when it's at a remote site? Locally we are good, but anytime we go remote it's not accessible. (With pcg controllers bacnet routing enabled..... of course)

Sorry for the hijack.

Uninstall CCT and reinstall it and you will be fine or use the bacnet router option in CCT ......

Originally Posted by hvacpilot

If you upgraded your CCT to 5.3, you will need the 5.2.5.0100 patch for passthru component to work properly on your pc or laptop. Email me and I can send you the patch.

They already have 5.2.10 patch.

If you upgraded your CCT to 5.3, you will need the 5.2.5.0100 patch for passthru component to work properly on your pc or laptop. Email me and I can send you the patch.

OMG I let the secret out!!!!!!!!!!!!!!!!!

CCT 5.3 has a bacnet router connection option now, you do not have to open CCT from the tools menu to use the CCT ethernet.

Originally Posted by Tech83

Did you do all upgrades before installing 5.2.10? I think there were patches that needed to be done before upgrade.

The patch is exclusive and can be installed with out previous patches installed. As for CCT passthru you shoudl try to uninstall CCT and reinstall it...

Originally Posted by integrator

....
We just patched our Johnson system to 5.2.10 and installed the new CCT 5.3.

Now we can't launch the CCT from MSEA, under Tools. We can lauch it from it's own icon. The problem is that without being able to launch it from within MSEA, we can't use the ethernet passthru to communicate.

you didnt place the dead chicken inside the pentagram before you put the silver dagger in did you???
...now youre gonna need some 'eye of newt' prepared by a zombie
tsk tsk


...I couldnt help myself...its one of my favourite jokes about Johnson MSEA...sorry in advance for poking fun

Is the Java the correct version?

Did you do all upgrades before installing 5.2.10? I think there were patches that needed to be done before upgrade.

MSEA 5.2 and CCT 5.3

Hello,

We just patched our Johnson system to 5.2.10 and installed the new CCT 5.3.

Now we can't launch the CCT from MSEA, under Tools. We can lauch it from it's own icon. The problem is that without being able to launch it from within MSEA, we can't use the ethernet passthru to communicate.

Thanks for any help