Reply to Thread

Originally Posted by Southern Mech

How you gonna gas and go?

I agree to a point, but the majority will need gas added, recovered etc so that would mean another trip to get gauges with hoses.

Now, I do have a cooper multifunction that has wired xducers for gauges that I use daily, very nice unit, but rarely do I use it only.

So your patent is out, Cooper already has one and its been out for a while, I may add I have spent around 2k on it.

I put gas in all the time with my cooper mfm300. Add a MxMxquick connect tee (JB makes them) and a 6" ball valve tee to the unit. I then leave a 72" hose and a 6" ball valve hose on all my refrigerant tanks. hook the ball valve hose to the back end of tee and throttle with ball hose from tank. gas and go. could also add a ball valve hose between transducer and tee but not necessary. The tees i have are jb A-34000, shraeders in male fittings but no depresser in quick coupler.

Originally Posted by craig1

I want wireless transducers and temp clamps that connect via bluetooth to my iPhone.

That would be the sweetest thing ever.

That would be pretty awesome. I wouldn't even have to get out of the van!

I want wireless transducers and temp clamps that connect via bluetooth to my iPhone.

That would be the sweetest thing ever.

this would be very nice for checking exotic refer equipment with minute charges.
i used to work on some bizarre refer stuff, microscopes, cell splitters etc..
some of these had minute charges that even putting a shorty hose and gauges on could cause issues.

Originally Posted by Chris_Worthington

Why are we not going to wired pressure transducers for our pressure/temperature measurements?

Add a tee and ball valve and we have all we need. Am I missing something here or should I patten this obvious trend in the industry?

Hoses are UN-needed anymore, IMO

What say you?

Most the new stuff is like this already. Even copeland isn't sending out C/U's with mechanical pressure switches anymore.

Originally Posted by Chris_Worthington

Sometimes we do, do DUI/PUI check points here

Hahaha when I read this thread that was one of my first thoughts was of a Neanderthal like facility maintenance guy that would laugh at your idea because he has a tire pressure gage. It is a neat idea though. Many of us just carry stubby gages on a service check. I think your idea would be great for automotive.

Originally Posted by Freightshaker

I have a wireless tool with no hoses I use to check pressures. Whentn got me a tire pressure Gage. Just pop it on the suckin line and when it's under 60 just add some freezon. Whal it's just like a tyre.

Sometimes we do, do DUI/PUI check points here

I have a wireless tool with no hoses I use to check pressures. Whentn got me a tire pressure Gage. Just pop it on the suckin line and when it's under 60 just add some freezon. Whal it's just like a tyre.

Originally Posted by mark beiser

The Cooper MFM300 uses wired pressure transducers.

In the mid/late 90's Robinair made a a refrigerant gauge with wired pressure transducers, but they had severe issues with transducers failing. I went through 6 or 7 transducers in 2 months before United just started giving people their money back on it. Was >$500 for the setup 15ish years ago.

Like everything else like this, we are there and the pricing is there, IMO.

2 years tops and it will be the new cats meow.

The Cooper MFM300 uses wired pressure transducers.

In the mid/late 90's Robinair made a a refrigerant gauge with wired pressure transducers, but they had severe issues with transducers failing. I went through 6 or 7 transducers in 2 months before United just started giving people their money back on it. Was >$500 for the setup 15ish years ago.

Something like this times 2 or more that fits in a tool pouch http://www.fluke.com/Fluke/usen/HVAC....htm?PID=56634

Add in a tee on each...

Then I only need a single hose for my suckalater and 2 for the recovery...

All other service work needs no hose.

Better yet I would not even an additional tool for my suckalater to measure microns.

Program in the gasses and walla SH SC etc.

No lost gas and it fits damn near in my pocket...

I bet it comes and I bet it comes soon

side cutters.... make it simple

Originally Posted by jpsmith1cm

I'm onboard with an idea like this.


Give me a series of sensors connected via wireless.

Not just transducers and temp sensors, either. That's just the beginning.

Airflow sensors.
RH/WB sensors.
Voltage/amperage/wattage sensors

Heck, there are probably sensors out there that I would love to have, but don't even know about.

Let me configure the data view and combinations (SH/SC, delta T/delta P) as I see fit on a PC/Tablet screen. Let me log the data and be able to manipulate it mine it as the job requires.

There's a difference between working on a residential unit and a rooftop unit. A chiller and a rack.

Give me the flexibility to build an instrument set that suits the job that I do, change it as the requirements of my job change.

Cooper already has a similar device, xducers, temp, s/h and s/c, airflow ,rh, data logging etc.

I have realized all these boards in a simple condensing unit is why god invented side cutters

I'm onboard with an idea like this.

Give me a series of sensors connected via wireless.

Not just transducers and temp sensors, either. That's just the beginning.

Airflow sensors.
RH/WB sensors.
Voltage/amperage/wattage sensors

Heck, there are probably sensors out there that I would love to have, but don't even know about.

Let me configure the data view and combinations (SH/SC, delta T/delta P) as I see fit on a PC/Tablet screen. Let me log the data and be able to manipulate it mine it as the job requires.

There's a difference between working on a residential unit and a rooftop unit. A chiller and a rack.

Give me the flexibility to build an instrument set that suits the job that I do, change it as the requirements of my job change.

How you gonna gas and go?

I agree to a point, but the majority will need gas added, recovered etc so that would mean another trip to get gauges with hoses.

Now, I do have a cooper multifunction that has wired xducers for gauges that I use daily, very nice unit, but rarely do I use it only.

So your patent is out, Cooper already has one and its been out for a while, I may add I have spent around 2k on it.

Why even go wired Chris, go wireless!

I think you missed nothing.... carry... on.... lol

Refer gauges going ?

Why are we not going to wired pressure transducers for our pressure/temperature measurements?

Add a tee and ball valve and we have all we need. Am I missing something here or should I patten this obvious trend in the industry?

Hoses are UN-needed anymore, IMO

What say you?