Post a reply to the thread: AccuTools BluVac Micron Gauge
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
Originally Posted by energy star We have taken the bluvac apart. Each piece, every piece. I guess they were going to try to fabricate one. Not for me, pita. There are not a lot of pieces....what did you discover?
Originally Posted by itsiceman We? They? WTF? Weird post es unless "we" and "they" were going to make a bluvac for accutools Almost sounds like an attempt to reverse engineer a BluVac.
Originally Posted by energy star We have taken the bluvac apart. Each piece, every piece. I guess they were going to try to fabricate one. Not for me, pita. We? They? WTF? Weird post es unless "we" and "they" were going to make a bluvac for accutools
We have taken the bluvac apart. Each piece, every piece. I guess they were going to try to fabricate one. Not for me, pita.
Love mine. I think i have actually loaned it out more than i have used it (to the install crew to hopefully improve the process) But got an okay and to order 4 Yellow blue vacs from jmart last week. (yay now i can use mine for a change) Now i am going to have to get them some appion valve core removals too. Our older install guys who didnt believe me about about changing oil frequently and leaking hoses got an eye opener after using your product. they couldn't pull a good vacuums at all. Came to me saying my vacuum pumps broken. Changed the oil, and purchased some new hoses good as new. This tool has greatly improved and will continue to improve our install and evacuation procedure thanks for the great product
Originally Posted by darctangent If it's not prying to ask, it appears that you have a reciprocal agreement with UEI- they licence your Vacuum gauge and you licence their scale for sale, is that more or less correct? No, we private-label the scales for them as well. In exchange, we get access to their substantial distribution network. Originally Posted by darctangent I like your product, and while I don't have your Micron gauge (My YJ 69075 still works) I'll buy one eventually! I made a suggestion that you de-couple the sensor from the display about a year ago, I still have to stick with that recommendation. It would really take your product to the next level as far as I'm concerned. If you did that I'd be on board 110%. beyond that I start to get into "pie in the sky" requests of a trend graph, etc... I won't bore you death! Your original suggestion is still on my white board (along with dozens of other good ideas). We will continue to design new products centered about the basic BluVac tech, but we are a small company, and new, quality, products take time and money to produce. Originally Posted by darctangent As a value added Item I would think you might get some more dollars to sell a Bluvac Kit in a box as a separate add-on sale. A great way to store the bluvac and assorted parts (CRT's, bottle of Alcohol, Vacuum gauge coupler, and so-on) put a good magnet or two on the back and it's the Bluvac kit. Just a thought. Keep your eyes open... Originally Posted by darctangent Best of Luck! Thanks!
Originally Posted by darctangent Joey, I like your product, and while I don't have your Micron gauge (My YJ 69075 still works) I'll buy one eventually! I made a suggestion that you de-couple the sensor from the display about a year ago, I still have to stick with that recommendation. It would really take your product to the next level as far as I'm concerned. If you did that I'd be on board 110%. Best of Luck! I agree with this. I tested bluvac not long ago. hose to gauge left me often trying to get gauge pointed in a ergonomically convenient direction that which it could be read without having to over torque the hose or continue to pick up the gauge and hold it to read it. Same reason i quit using just about every other micron gauge on the market today and picked up the Y/J setup with remote sensor. I then super glued a magnet to the back of it to make it more user friendly.
Originally Posted by Tassajara if your in the market i cant recommend this gauge enough. As with all the little guys digi cool, accutool appion etc... if we dont support them they wont be there. I dont think its any secret what a certain color manufacture did to a ceratin loud mouth scot outa the NW part of Canada. If you resemble this comment it is purely coincidence as these are fictional examples I agree 100%.
Joey, If it's not prying to ask, it appears that you have a reciprocal agreement with UEI- they licence your Vacuum gauge and you licence their scale for sale, is that more or less correct? I like your product, and while I don't have your Micron gauge (My YJ 69075 still works) I'll buy one eventually! I made a suggestion that you de-couple the sensor from the display about a year ago, I still have to stick with that recommendation. It would really take your product to the next level as far as I'm concerned. If you did that I'd be on board 110%. beyond that I start to get into "pie in the sky" requests of a trend graph, etc... I won't bore you death! As a value added Item I would think you might get some more dollars to sell a Bluvac Kit in a box as a separate add-on sale. A great way to store the bluvac and assorted parts (CRT's, bottle of Alcohol, Vacuum gauge coupler, and so-on) put a good magnet or two on the back and it's the Bluvac kit. Just a thought. Best of Luck!
Originally Posted by lytning still think the Bluvac is the same as the UEI DMG200. What does anyone else think? The UEI DMG100 and DMG200 gauges are built side-by-side with the BluVac and BluVac LTEs in our factory. Except for the color, they are the same.
Originally Posted by lytning still think the Bluvac is the same as the UEI DMG200. What does anyone else think? http://hvac-talk.com/vbb/showthread....1#post15347471 Straight from the horse's mouth. The BluVac and the UEI DMG vacuum gauge are the same
still think the Bluvac is the same as the UEI DMG200. What does anyone else think?
I use DV-291 http://jbind.com/products/product-se...spx?SKU=DV-291
Originally Posted by gravity Hey JoeyD. Maybe on your website you could list an assortment of fittings that the bluvac could screw into? I think that would help a lot of us. The BluVac port is a standard 1/4 male flare. It should interface with pretty much all standard 1/4 female flare connections with a rubber seal. The only connectors I would stay away from are actual metal-to-metal female flare fittings. I don't think you'd see good vacuum performance in that case.
Thanks Jbart
It appears to be the same one I have and my blue vac will screw into it. On my earlier post I meant I had several micron gauges and bluvac is superior.
Hey JoeyD. Maybe on your website you could list an assortment of fittings that the bluvac could screw into? I think that would help a lot of us.
you have several of what...?
I have several and Bluvac is far superior.
So it will screw into it?
Forum Rules