Reply to Thread

Originally Posted by TheBladeJN

Email me directly and I can provide you with the information. You can find my e-mail address is my profile.

Thanks

I can't access your profile same with mine I dont know why? If you can access my profile my email is there.. sorry for that. thanks in advance!

Email me directly and I can provide you with the information. You can find my e-mail address is my profile.

Thanks

Originally Posted by rocketz

Hi Blade,

can you send or provide me how to get the backdoor access for GCM/LCM. I'll working on mz2 that has ui:1 reading differential pressure on the farthest ahu to feed the secondary chilled water pump at the other bldg. when the gcm/lcm was replaced it did not provide anymore dps signal to the secondary pump.. according to the manual the gcm/lcm must be reconfigure to allow the ui:1 dps/ems:1:av1 signal to send to other gcm & mz2 at the other bldg that feed the pump. but the problem is i dont have the gcm/lcm access. I thought i%

Originally Posted by TheBladeJN

I emailed you some information that may help you in your quest

Hi Blade,

can you send or provide me how to get the backdoor access for GCM/LCM. I'll working on mz2 that has ui:1 reading differential pressure on the farthest ahu to feed the secondary chilled water pump at the other bldg. when the gcm/lcm was replaced it did not provide anymore dps signal to the secondary pump.. according to the manual the gcm/lcm must be reconfigure to allow the ui:1 dps/ems:1:av1 signal to send to other gcm & mz2 at the other bldg that feed the pump. but the problem is i dont have the gcm/lcm access. I thought i%

Hi Blade,
I am having problem to access one of my gcm's 86120. Invalid code.
Can you help me on how to get the backdoor password?
I really thank you!

You must live closer to Google than me. Can I get that too?

Information Emailed to you

Originally Posted by sdfrench

Blade,
Would be able to e-mail the code to generate the backdoor password OR the keywords you used to find it on Google. My search didn't come up with anything useful.

Thanks

I emailed you some information that may help you in your quest

Need Backdoor Code to generate password

Originally Posted by TheBladeJN

I just spoke with someone here at work, and he informed me it still works.

He just used it a few months ago with one of our older customers.

The formula just changed after 2000.

I just did a search on Google, and found the code.

Can't post it here because I don't want to be banned for posting proprietary information, but someone did post it many years ago on a website.

Have fun.

Blade,
Would be able to e-mail the code to generate the backdoor password OR the keywords you used to find it on Google. My search didn't come up with anything useful.

Thanks

Backdoor still works

I just spoke with someone here at work, and he informed me it still works.

He just used it a few months ago with one of our older customers.

The formula just changed after 2000.

I just did a search on Google, and found the code.

Can't post it here because I don't want to be banned for posting proprietary information, but someone did post it many years ago on a website.

Have fun.

Backdoor

I think since the year 2000 upgrade, which was rev 5.0 or higher, the backdoor stopped working.

Information

The basic user/pass for GCMs & LCMs is:

user
pass

But there is a backdoor code that can be used, but I have forgotten it 10 years ago when I used to work on these devices.

The backdoor user is BCFLD, but I don't remember how to figure out the password.

GCM & LCM default password

Originally Posted by Snides

wmd.

Check your messages. User name and Password detailed.

Hi Snides can also me the default username & password. My email add is in my profile. Thanks in advance

Originally Posted by Snides

wmd.

Check your messages. User name and Password detailed.

Originally Posted by Snides

wmd

Check your messages again.

I know this is a old post but if you are able can you send me the same user names and passwords in a reply or messages also?

I am also in need of the user name and password. We have a Gmc 84211-1 that we are only able to access the display and not change setpoints. We have not been able to find the password. I would greatly appreciate any help.

I thought you were somebody else,sorry.

(O.Z. is the name of a controls Co.)

Originally Posted by brdman

Snides, is oz the name of your work?

Its a place but not my work.

If you need spares, Ill be taking out a truck full of em come July

Snides, is oz the name of your work?

wmd

Check your messages again.

Barber Colman GCM and LCM

Snides: check your messages. I'm new to the forum and not sure if I posted my reply to your message correctly.

wmd.

Check your messages. User name and Password detailed.