Post a reply to the thread: carrier comfort link
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
Originally Posted by hvac69 Alarm codes Push escape and enter at same time the description will scroll across the marquee. Ok I'll try to remember that for next time!!!!!
Service tool It may not help you at the moment with a changed password, but you can purchase a Carrier Service tool and access anything you need to via the Carrier network or the connector on the front of the Comfort link. No password is required when you are using the tool. Its somewhere in the $500.00 range. You should search the carrier data base for the PDF file for the comfort link and save it. I know of no person that can memorize all of the alarm codes on that control. Good luck.
Service tool
Originally Posted by Dallas Duster What were you working on a chiller? Alarm codes Push escape and enter at same time the description will scroll across the marquee.
Originally Posted by valdelocc the hardest part is finding the meaning of the alarm codes without the book, Carrier doesnt print them inside the units like most do, I've also found one where the default "1111" was changed to ????? and there was no way to get in, I still dont know they did it. What were you working on a chiller?
Originally Posted by valdelocc the hardest part is finding the meaning of the alarm codes without the book, Carrier doesnt print them inside the units like most do, I've also found one where the default "1111" was changed to ????? and there was no way to get in, I still dont know they did it. Press selct and enter at the same time. The alarm will read across the marq.
Originally Posted by bustedknuckles Comfort Links are nice, press escape to clear the markee, scroll to alarms, press enter, press enter again on curr. alms.. It will show the alarm code, press escape and enter at the same time and it will read off the exact alarm/time/date. AS above, I wont give out passwords, your local carrier dealer tech wizz. can give you that. But above all-get the service manual on the unit. the hardest part is finding the meaning of the alarm codes without the book, Carrier doesnt print them inside the units like most do, I've also found one where the default "1111" was changed to ????? and there was no way to get in, I still dont know they did it.
Comfort Links are nice, press escape to clear the markee, scroll to alarms, press enter, press enter again on curr. alms.. It will show the alarm code, press escape and enter at the same time and it will read off the exact alarm/time/date. AS above, I wont give out passwords, your local carrier dealer tech wizz. can give you that. But above all-get the service manual on the unit.
Originally Posted by pyramid a/c no in the unit itself it is a stand alone unit with the panel inside, although the unit is running it is still sending an alarm and i cant get rid of it and everything is running normally. If its comfort link all of the alarms and set points are accessible through the front panel. Owning a Navigator just means you can remote connect and cycle through the options from about 3 feet away. A Navigator is great when you come up on a Comfort link with a bad panel. Otherwise the front panel can do everything the Navigator can do. If you're asking for passwords I cant help you. I don't believe in giving those out arbitrarily. If you want the manual then contact your local Carrier with the model and serial number and they will be happy to help or find it online.
It may be working but I don't think its working normally if there is an active alarm. You haven't given enough information to even determine what you have. Do you have a PSIO controller, Scrolling Marquee, a PIC controller, etc. Find the manual online and it will have the answers you are looking for. Good luck. ...Ron
Originally Posted by Dallas Duster Read he manual for the equipment you are working on there are detailed instructions for accessing the various menus. none better advice can be given
Originally Posted by Six Through the panel ? no in the unit itself it is a stand alone unit with the panel inside, although the unit is running it is still sending an alarm and i cant get rid of it and everything is running normally.
Originally Posted by pyramid a/c hi i need to know how to get into the program on the comfort link to see alarms, change setpionts if anyone has any idea please let me know, thank you Read he manual for the equipment you are working on there are detailed instructions for accessing the various menus.
the comfort link navigator tool makes it easier to change set points,view alarms etc, the tool could be bought from your local Carrier dealer. there was one for sale here some time ago,http://hvac-talk.com/vbb/showthread.php?t=650581
Through the panel ?
carrier comfort link hi i need to know how to get into the program on the comfort link to see alarms, change setpionts if anyone has any idea please let me know, thank you
carrier comfort link
Forum Rules