Reply to Thread

I don't waste my effort thru pm's when someone ask for tech lit in an open forum; but suit yourself.

Originally Posted by dandyme

might want to consider putting an email address in that profile

For? Have pm on site open to send works for me.

sent from my kindle fire using tapatalk 2 please excuse any typographical errors using tapatalk

might want to consider putting an email address in that profile

Originally Posted by 2sac

The heat runs in test but not from the stat, correct? Sounds like either a break in the wiring or the stat is no good.

Did so more looking in to this and found a break in t stat wire all is well now. Thanks

Sent from my BlackBerry using Tapatalk please excuse typographical errors

The heat runs in test but not from the stat, correct? Sounds like either a break in the wiring or the stat is no good.

Originally Posted by dandyme

if you can run thru the test sequence
you will need to drag out the book and step the baysens thru to see if it is actually sending signal to unit to operate

Problem is I don't have a book that came with rtu..

Sent from my BlackBerry using Tapatalk please excuse typographical errors

if you can run thru the test sequence
you will need to drag out the book and step the baysens thru to see if it is actually sending signal to unit to operate

Sorry for title spelling stupid auto spell on kinkle thanks

Sent from my BlackBerry using Tapatalk please excuse typographical errors

Grand ignition issue

Hello all I got a trane rooftop ycd241c4lrcb. And I can not get it to run in heat with Dc tstst. If I jump from test 1 and 2 unit get to heat portion unit will fire right up. Is there anything else I should check. I have tryed to power off and on no punk and ignore board will sit just solid green. Any help would be appericated or u can pm me here on this site
sent from my kindle fire using tapatalk 2 please excuse any typographical errors using tapatalk