Post a reply to the thread: Fieldpiece
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
Originally Posted by northstarair I'm leaning towards the 77. Great meter. I own a couple of them. I just got the 56.... leagues better than the 77 IMHO i strongly recommend the 56
After 6 years in the trade using UEI meters i purchased my first Fieldpiece product, the sc77, love everything about the meter except short leads and no magnet. Meter operation is flawless! since that day i have slowly added more FP products to my service van due to the excellent customer service i have received. Today i received a box full of new tools. Sman4, HG3, extra et2w, extra dual temp head, and a few more heads. I now put all of my trust in FP instruments because they stand behind them and i have yet to get a false reading from any FP product. Thanks for the great tools and a big thanks for the great customer service, you make my job easier and safer!
Originally Posted by RussellHarju This is my personal favorite http://www.youtube.com/watch?v=q71dN...y9qcEcS_lXdSyA Is there any way to purchase just the RCT2 test leads because I already have everything else that comes in the ADK7 kit when I bought the hs36 but would really like the long thin probes for getting into the backs of stakons, plugs etc.
Well I cannot say the DC 'vigorously' gives data... however it DOES give data on a predictable basis... something many other electronic test gadgets do NOT do. Most forum posts; regardless of origin; have a propensity to be intransitive...
Originally Posted by ga-hvac-tech Yeah, it just keeps spewing out ACCURATE readings day after day after day after day after day... All I have to do is change the battery 3-4 times a year. 1spew verb \ˈspyü\ Definition of SPEW intransitive verb 1 : vomit 2 : to come forth in a flood or gush 3 : to ooze out as if under pressure : exude transitive verb 1 : vomit 2 : to send or cast forth with vigor or violence or in great quantity <a volcano spewing out ash> —often used with out — spew·er noun See spew defined for English-language learners » See spew defined for kids » Examples of SPEW Exhaust spewed out of the car.
Originally Posted by hvac5646 What was the name of that brand ....? ....Diggi Spew? (ga-hvac-tech, it's also amusing to throw in a rejoinder..) Yeah, it just keeps spewing out ACCURATE readings day after day after day after day after day... All I have to do is change the battery 3-4 times a year.
Yeah that's exactly what I want to do......flush the manifold each time? Nope.
Originally Posted by ga-hvac-tech I know I am throwing gasoline on the fire... sometimes it is fun... My DC is 7+ years old... I have ABUSED the sensors to death (hit with pressures over 500#, pulled vacuums through the manifold then hit with release of refrigerant, sensors have never been cleaned, never flushed the manifold)... not a single issue with them. What was the name of that brand ....? ....Diggi Spew? (ga-hvac-tech, it's also amusing to throw in a rejoinder..)
I know I am throwing gasoline on the fire... sometimes it is fun... My DC is 7+ years old... I have ABUSED the sensors to death (hit with pressures over 500#, pulled vacuums through the manifold then hit with release of refrigerant, sensors have never been cleaned, never flushed the manifold)... not a single issue with them.
Originally Posted by marybear I have a question concerning the SMAN3. On my third one due to the high side malfunctioning. Any truth to what I have been told about nitrogen causing issues with the sensor(s) ? I have heard about others having the same issue. I always flush my SMAN3 with nitrogen after each use, and have never had any problems with the sensors! I know a few people with SMAN's and most of them flush with nitrogen after each use and never have had problems. Maybe check your Nitrogen regulator or maybe the hose for some type of contamination?! Just trying to help out if I can. Good Luck
Inert gas causing issues........ Never heard that one
I have a question concerning the SMAN3. On my third one due to the high side malfunctioning. Any truth to what I have been told about nitrogen causing issues with the sensor(s) ? I have heard about others having the same issue.
Besides the price, what is the difference between the SC56 and the SC55? edit: The video explains the difference at the very end. I think I'm going to go with the 56 even though it's a bit more in price. I like the inrush current feature.
Originally Posted by ga-hvac-tech I have been using a SC76 for over a decade... just found the DC volts does not seem to work well anymore. Would not have known other than checking a battery... never use DC volts. I have an SC77 for a backup... rarely use it. One of these days the 76 will die and the 77 will become the main meter. This is my personal favorite http://www.youtube.com/watch?v=q71dN...y9qcEcS_lXdSyA
I have been using a SC76 for over a decade... just found the DC volts does not seem to work well anymore. Would not have known other than checking a battery... never use DC volts. I have an SC77 for a backup... rarely use it. One of these days the 76 will die and the 77 will become the main meter.
Still got my 8 year old SC66...works every time.
The SC77. The sheer jump in quality and trust in my meter has been significant. Next fieldpiece purchase will likely be a set of SMAN3 or SMAN4 manifolds. Probably in a few months
Do you try to short it out if it will read a cold junction. Not sure if it works like that on this meter.
Originally Posted by hvacrmedic It doesn't read at a . I should probably test them all for accuracy using my Fluke 289. Fluke 289..USA made... I could not agree more. And at $500 a pop it says quite a bit about the quality of tools the buyer owns.
Other than when I was checking out all the features when I first unboxed it, I've never actually used the temperature function of my SC56.
Forum Rules