Post a reply to the thread: APC FM35M Computer room unit
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
No Display = RS485 port on the drive. Windows 95 and later.
Thanks for that info
All I know is...yes it communicates via modbus to main controller. I have only replaced one and I got it from our APC rep. I was told it wasn't programmed by APC, but it was programmed for APC.
APC FM35M Computer room unit I have a APC (liebert type a/c),has 2 seperate direct drive / frequecy drive motors. One of the 2 drives is shot (GE Fuji drive).It has no local display on it and the main microprocessor has some access to its running parameters,my question is the drive controlled directly by the microprocessor via modbus or something proprietary.i'm trying to figure how the drive knows what parameters it needs to run at,perhaps its preconfigured from apc and has to be purchased thru apc in order for it to operate.Any help appreciated the books i read had limited info. Thanks
APC FM35M Computer room unit
Forum Rules
