Reply to Thread

Originally Posted by freddy-b

Thanks man! Does that mean I get a new Cadillac and a trip to DisneyLand?

I'd guess he'd pick a pink one.

I doubt he'd take a trip to Disneyland though, too much trouble keeping his underling, the USC boy, away from the little girls.

Go Vikings!

Originally Posted by NINAX

Absolutely, just like Kurt.

Thanks man! Does that mean I get a new Cadillac and a trip to DisneyLand?

Originally Posted by freddy-b

So are you calling me MVP material?

Absolutely, just like Kurt.

Thanks

It works great, thanks again.

Originally Posted by NINAX

OK, Kurt, if you say so.

So are you calling me MVP material?

Originally Posted by freddy-b

Ninax "And" is still a PO, so technically you are incorrect.

OK, Kurt, if you say so.

Ninax "And" is still a PO, so technically you are incorrect.

Dude, He is referinf to using a "And" block and making it "Null" on inactive.

On a UNT it will work. Be careful with DCO's in a DX, just the same problem as with older JCI stuff...still applies.

Come on freddy, you know you don't need a PO to do that!

Keep that up, and I'll have to start calling you Kurt.

Let me dig around. I think I have a PO for what you need. They were created by some really gifted eggheads . I lack the talent and patience to create them from scratch.

Freddie-B Boolean Switch

I want to use some true/false custom control logic, linked to a binary outout on a UNT to do the following,

False= Binary output is in "Auto"
True= Binary output is forced to "Off"

I have done this with AO's before using a "numeric switch" to accomplish, but I didn't find a Boolean switch to make it work on a BO?

Any info would be appreciated.

Thanks in advance.