Post a reply to the thread: Carrier Chiller 30RAP
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
to reset the pump,coil, strainer alarms. go to status, enter scroll down to pm,enter scroll to pump,coil,strainer sub catogories and reset timers back to 0 alarm light will go out
carrier 30RAP It did run on and off for a few days and now wont run at all And I cant get it to reset the alarms T300 T302 T303 What are pump maint coil maint and screen trap maint Once these have been performed it say to go into pm and say yes they have been done Cant find pm no where
carrier 30RAP
Originally Posted by pro66pony We lost electric for a few hrs and the chiller was all shut down within a few minutes Once the electric was back on I turn the chiller on and it threw a T300 T302 T303 It has no pumps so that I cant do but have done the coils and strainer But when trying to reset the alarms they will kick off for 5 sec then back on How do I get it to reset?????????????? Some one help But the chiller continues to run correct? I would locate that information in the manual.
carrier 30RAP We lost electric for a few hrs and the chiller was all shut down within a few minutes Once the electric was back on I turn the chiller on and it threw a T300 T302 T303 It has no pumps so that I cant do but have done the coils and strainer But when trying to reset the alarms they will kick off for 5 sec then back on How do I get it to reset?????????????? Some one help
i managed to get back to the chiller and found out that P201 is the same as A201. I also was infomed that this chiller's HEX has a pressure drop of 17 and the old one was 7. Going to check the pump.
Originally Posted by HJ Controls I think this a preventative maintenance alarm. Push the buttons like the previous response and you will get the definition. I would try this , it just might work. Then you will know for sure what it means. Does the system have a back up chilled water pump on it? I'm going to take a guess and say it's some sort of pre- alarm flow code. But thyself just a guess.
yeah that rings a bell maybe pump or strainer maint required?
I think this a preventative maintenance alarm. Push the buttons like the previous response and you will get the definition.
if you hit escape and enter at same time while error code is displayed does it not give you a definition??
I know about the A201 alarm but the display is showing a P201 thats why i am a little confused
A201 Alarm Cooler Flow/Interlock Contacts Opened During Normal Operation Flow switch opens for at least 3 seconds after being initially closed All compressors shut down. For models with dual pumps, the second pump will be started if available Manual Cooler pump failure, faulty flow switch or interlock, pump circuit breaker tripped
Carrier Chiller 30RAP Has anyone ever come across an error code of P201 on a Carrier chiller with comfortlink controls. If you have, what is. I spoke to carrier techs and they don't know their passing it off to thier engineering dept.
Carrier Chiller 30RAP
Forum Rules