PDA

View Full Version : Dirty sock syn.



jayinsc
01-30-2006, 07:57 AM
Before I try it, what is anybody's opinion on spraying a light coat of clear coat finish on an evap coil after a good cleaning to beat the d s s? The unit is a 4 yo. package heatpump

t527ed
01-30-2006, 08:42 AM
from what i have read anything less than a "dipped in" coating is a waste of time.

fonzy40
01-31-2006, 06:00 PM
if you spray it make sure you leave a clean out access because i'm sure it will help collect dirt.

turtle
01-31-2006, 09:50 PM
This is Turtle.

Coating a Evaperator with any type paint is not a good ideal at all. Also you tring to coat the inside areas of the fins would be a big problem and would be just about impossible to get it right.

Now there is two cures for DSS and they are UV lites and a chemical called Bio-Fresh but sold under different names. Now you can experiment with other cures if you like.

TURTLE