PDA

View Full Version : Ranco



TFoster
09-06-2011, 09:16 PM
Anyone have problems with caps leaking on newer ranco dual pressure controls

MUNC
09-09-2011, 10:21 PM
This past summer, not one but two brand new out of box caps broke. first lasted over night,then lost walkin charge. second lasted 2 days. then lost charge again. Third times a charm, still running that i know of. Caps breaking where they flare to 1/4" diam (braze joint)

TFoster
09-10-2011, 09:34 AM
thanks for reply wanted to make sure it wasnt just the way they were installed

jogas
09-10-2011, 09:58 AM
I once worked at a Shop that would not buy that Brand...only Penn.
They seemed to hold up better.
The last Refrigeration Shop I worked at a while ago went to the 1/4" Male Flare Model Penn and used the flexible stainless steel weave reinforced hoses. No more cap tube leaks.
Makes sense when you factor in Labor and Refrigerant cost...especially on a Rack System.

hvac wiz 79
09-15-2011, 11:13 PM
danfoss makes a nice one with very thick copper. I've yet to use one but seen it at the supply house.