HEY COLDTECH!!

[redneck hvac-r]

I was just in the parts house the other day and almost bought a piece of test equipment but don't have the extra $$$ at the moment as I am getting ready to go it alone for a change.

So here is the post you made recently:


coldtech
Professional Member

Registered: Nov 2005
Posts: 21
I built a start box to test compressors. Dual voltage. The switches run contactor coils instead of subjecting them to LRA. Has a reverse rotation switch. Pig tail to connect to 230 V Can use on any comp thats single phase. Finally got tired of Annie.


11-23-2005 07:33 PM IP: Logged



Question is can I get the instructions from you on how you made this and/or a parts list? A picture would help also I would think. I made an "annie" years ago in school but it could be a pain in the @#$% to use and I lost it a few years ago.


Just reply here and I will get back to you.


thanks!

redneck.

[coldtech]

Originally posted by redneck hvac-r
I was just in the parts house the other day and almost bought a piece of test equipment but don't have the extra $$$ at the moment as I am getting ready to go it alone for a change.

So here is the post you made recently:


coldtech
Professional Member

Registered: Nov 2005
Posts: 21
I built a start box to test compressors. Dual voltage. The switches run contactor coils instead of subjecting them to LRA. Has a reverse rotation switch. Pig tail to connect to 230 V Can use on any comp thats single phase. Finally got tired of Annie.


11-23-2005 07:33 PM IP: Logged



Question is can I get the instructions from you on how you made this and/or a parts list? A picture would help also I would think. I made an "annie" years ago in school but it could be a pain in the @#$% to use and I lost it a few years ago.


Just reply here and I will get back to you.


thanks!

redneck.


Redneck,
I,d be happy to help you out. As soon as I get caught up and have a little extra time and a new battery for my digital camera. Should be a few days.
This thing is much better than the " Annie " I've had several of those, spent more time fixing them than diagnosing compressors. The one I made has worked flawlessly since the day I made it.
Let me know if you want me to email the info to you or post it here. I'll check back in day or so.

[redneck hvac-r]

Thanks for the reply, I would like for you to email it to me but I would also think that the readers here could benefit from it as well so the decision is yours.

I would like the email because I have not been able to see any pictures that are posted on the threads.

Thanks again,

Redneck.

P.S.

Please email to junkbox2a@yahoo.com

[coldtech]

Look for something this weekend.