Goodman air handler blowing cold air only

[luciano]

Hello,this is my first post.I'm amazed at the amount of knowledge you guys are shareing so I'll throw another one at you.
I have a relatively new (2 yrs) Goodman 2 ton air handler
It only blows room temp air when set on heat.I had a friend check the coils and he said that they have continuity?(is that what it's called).He suggested that the problem lies with the circuit board .What do you think?
>>>edit...
Thanks in advance!

>>>edit... please read the site rules (http://hvac-talk.com/vbb/showthread.php?threadid=1241)


[Edited by jultzya on 11-16-2005 at 02:25 AM]

[Jultzya]

Welcome to HVAC TALK. However this site has rules against giving out technical advice to DIY'ers. I have attached a link below for your convenience.

Here's something to think about though...

When was the last time you had that unit cleaned and inspected?

Fuel costs are skyrocketing.

So why not call in a professional to clean & tune up your furnace? While they are there they can inspect your unit to insure a safe living environment for you and your loved ones. Not to mention, having an efficient running system could save you more than the cost of the service.

What's your safety worth? I'm guessing more than the repair bill. ;)

Thanks for your understanding.

http://www.my-smileys.de/smileys2/033102sor_1_prv.gif (we can't help DIY, due to site rules (http://www.hvac-talk.com/vbb/showthread.php?threadid=1241) )

[beenthere]

Call apro.

240 volt, is not always user/beginner friendly.

[arcticair]

the problem is its a goodfornuttin thats what i call em the old geretrol company got kicked out of louisiana so they went to texas and changed there name to goodman


its hard to give you that answer because it could be a host of things first check and make sure theres no voltage problems then check all of the connections if you cant find anything curse loudly and call some one out the extra couple of hundred dollars couse save the life of your system...

[Mr Bill]

Originally posted by arcticair
the problem is its a goodfornuttin thats what i call em the old geretrol company got kicked out of louisiana so they went to texas and changed there name to goodman


I am glad they came to Texas then because I have sold many of them and they are still working great! and by the way there is a lot of equipment out there that fits the goodfornuttin label, even the one that's heating and cooling your home. :D

[tinknocker service tech]

robo here you go again lol
did you have the strip heaters installed in it
if so are they wired up properly
call a pro and get it looked at

[luciano]

Thanks guys,yes I'll call a pro.Sure enough this is not a do it yourself kind of thing.The friend that checked the system had taken some classes of HVAC,although he's not a licensed pro.