View Full Version : Protecting Wires
06-22-2011, 06:23 PM
I have/had to change out 4 of these CFM on some old Carrier units. The box has a knock out in it but I don't want to just stick the wires through the hole whith no protection. Is there anything made for that I can use like a MC fitting or something similar?
06-22-2011, 06:32 PM
Romex connector with a little caulk to seal it from moisture
06-22-2011, 06:57 PM
get some of these
Lowes (http://www.lowes.com/pd_46585-15527-49740_4294821891+5003693_4294937087_?productId=108 7999&Ns=p_product_prd_lis_ord_nbr|0||p_product_quantity _sold|1&pl=1¤tURL=%2Fpl_Conduit%2BFittings_4294821891%2B5 003693_4294937087_%3FNs%3Dp_product_prd_lis_ord_nb r|0||p_product_quantity_sold|1%26page%3D3&facetInfo=Less%20Than%20$1) or you local supplier
06-23-2011, 01:42 AM
Actually Carrier uses a cable end connector for those fan motors. The wires are wrapped with an insulating cloth then connector is tightend down. You should still be able to pick up some from your carrier dist. :.02::cheers:
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.