ak900

[papa_jo]

is it out yet? getting close to time for it to get it here, isn't it??!!!!?

[eddiegoodfellar]

Were the specs ever released?

[Home&Marine]

Doug said July.

[Danimal535]

Mid July he said

[Danimal535]

I would love to see some specs

[papa_jo]

june july mid july just get here would ya !!!!! i am not impatient

[Home&Marine]

june july mid july just get here would ya !!!!! i am not impatient


I am Impatient! I've asked Doug and JP at least 4 times WHEN?

I send Doug a PM this week. ;)

[Danimal535]

Doug said he will post the release date on HVAC talk

[ptemko]

Have they improved the temperature clamps with the new release of the Ak900?

[JWB]

Have they improved the temperature clamps with the new release of the Ak900?

yeah. mine are toast. i should be fixing them for tomorrow. my 1200 is going strong. love it.

[Home&Marine]

Doug said he will post the release date on HVAC talk

Doug should cut us some slack on the price too!

[jpsmith1cm]

The wiring on my beta unit was different.

Tougher, I'd say.

[Danimal535]

The wiring on my beta unit was different.

Tougher, I'd say.

Can give us some specs info capabilities of the AK900 JP

[jpsmith1cm]

Capability-wise it is the 1250 with a bit different display.

http://hvac-talk.com/vbb/showthread.php?t=697141

The first post in that thread shows a picture of an AK fully deployed. The only feature not in use there is the backlight which I rarely use.

The sensor connector is a bit different from the 1200/1250 series, but the sensor are the same type of sensor.

Any other questions?

[jpsmith1cm]

Keep in mind that my evaluation of the unit is based on the beta unit i have and may not reflect any changes of decisions that Doug has made since the initial design.

I believe he is making a single sensor and a dual sensor unit, also.

[Danimal535]

Thanks JP

[itsiceman]

Have they improved the temperature clamps with the new release of the Ak900?

Word on the street is guys are getting a thicker wire from plug to clamp right now from DC.

[itsiceman]

Can give us some specs info capabilities of the AK900 JP

An RSES ad I read said .5% FS on the AK900 so just like the older versions but more info on the screen at one time.
SH SC T1 T2 hi low psi and sat temps and refrigerant selection all at the same time

[itsiceman]

opps Delta t also

[itsiceman]

Shucks ...... Plus the Dynamic Offset Bar Graph :whistle:

[KLEINman]

I was so impatient I bought the 1250 a few weeks ago, guess I'll have to just buy a set of 900's too......:whistle: