Pittburgh Machine lockformer

[nymike]

Any one Looking For a Pittsburgh Machine .

[Jultzya]

Got pictures?

[ct2]

with how many hours on it ?

what kind of condition is the table in ? any grooves?

how has it been maintained? how often did you grease it?

how loud is it when it runs?

How much?

[nymike]

845 457 6288 for info

[deejoe]

I would think knowing the amount of material it takes to make the lock should be known as there are various;1"-1-3/8"ETC. ALSO, WHAT maximum GAUGE OF METAL WILL IT HANDLE?
Having this info now just may save an unnecessary phone call.(long distance)

[nymike]

24 1"

[Black Adder]

I'm very interested if the price is in my range. Where are you located? As this is quite a heavy piece of machinery I don't want to get killed on the shipping costs. I live in Western Canada but have a US shipping address as we are only 20 miles from the border so shipping should not be an issue. Check out my "Credentials for my email address if you prefer to commincate that way"

[Edited by Black Adder on 09-25-2005 at 12:00 PM]

[deejoe]

nymike;.... wow ..24 1"...now that was a lengthy reply. I hope you didn't hurt your typing fingers too much.
Anyway,a 24 gauge, and only a 1"lockformer is too small for for the fittings that I want to fab...min 20 gauge,1-3/8" (larger hammer down edge)
If I want a small lock of 1" I can easily bend (hand break) one up by the time that thing you got will finally send it through... lol

[Black Adder]

deejoe go hang out in the commercial section, we don't seem to use a lot of 20 gauge metal in residential.

[nymike]

DeeJoe , You a cheap.... wise ass ....bug off.

[ct2]

Lockformer makes a pittisburg machine reted for 20 gauge

a superspeed 20 that runs at a pretty good clip

their 16 gauge runs a little slower but I think the one deejoe is talking about is a Flager, that folds a pittisburg lock. by the time it gets through a 10 ft piece you could just about eat lunch and still have time left over for a nap

BA keep in mind that new that ss 20 can be had for around
2100 gallons of gas

[deejoe]

Nymike, take it easy. With that last amount of strenuous typing, your finger may be too sore to flip the switch on to demonstrate your machine..

[Black Adder]

Are you interested in selling this unit or what? I posted that I am very interested in buying a lockformer post a little more info ie: Price, location or send me an email

[Edited by lusker on 10-01-2005 at 08:26 AM]

[nymike]

I sentYou an email yesterday afternoon. $2500 usd located in Montgomery N.Y. Thanks Mike

[simpleman]

Mike is that what the junior cost up there in New York?

So for those that are asking about the flager it has a 1/2
hp motor on them and it will do 30 feet per min.

If you're a small guy that only does three to four houses per week then this would work fine.
They have serve me well and I'm ok at that pace the 1/2 hp will do.Also if you ever had the need to carry it to the job site it does not require a forklift to do so.

Just spray it down with some lubaroll every now and again and it will pay for itself.











[Edited by simpleman on 09-26-2005 at 07:18 AM]

[nymike]

I'm not here for negative comments or bull**** info . Who cares about Your opinions..The machine is in Nice shape ,if anyone is interested let Me know ..If Not ,dont bother post !I'm not interested in Morons that hide behind a screen. People either make money or sit on a computer .

[nymike]

Black Adder I sent You 2 emails to the address that You posted ??How about a reply ?

[rossfhill]

hey mike might be interested in your lockformer is it still avalible

[nymike]

845 457 6288 call Me

[2hot2coolme]

http://www.eaglemorlin.com

You can buy it brand new for the same amount as OP's

[deejoe]

and probably from a more courteous seller.

[nymike]

Moron alert ...Moron Alert...That piece Of Crap is a jap copy without the flanger attachment...To the dickhead that has no business commenting go _uck Yourself. It seems You guys are little kids that live in a trailer somewhere...

[nymike]

Has Anyone notice thatI post a pittsburgh machine for sale..Did You also notice the attack's and Negitive comments..I thought Guys on this board were to help each other. I'm ill and need money yet it seems a couple of Guys that arent even interested has to post bull**** ..Why ? Are You in this business or just some out of work failures that have plenty of time to screw with others? If You in business You'd have no time for this -hit..

[2hot2coolme]

I think you're the moron for posting you phone#


Hmmmmmm.... lots of bathrooms out there....

[nymike]

Why is that a threat ??

[nymike]

Maybe You have a business connection with the company that You posted

[nymike]

What pieces of chinese Crap..I'm wont give the sweat off My _alls for that junk..It cant be compared to a original lockformer.No wonder Your pissed off Trying to sell that garbage..What due you pay for a crate of those $200 a piece?

[curry]

I got of those lockformers too. Might be avialable in a little while.

interseted parties can post here.

Mine has an easy edger and is a lock former.

24 guage.

$1200.00

[ct2]

Ther lockformer with the easy edger is as slow as the Flager

I just increased the drive pully on the one in our shop to a 4" pully and it goes pretty well now



-------------------------------------------------------

but other than that , What has this thread become? the guy has a machine for sale at a reasonable price , whats wrong with that

[deejoe]

and the salesman of the year award goes to......lol