Johnson fx60 with webs workbench

[Norriski Tech]

Forgive me I am new with tridium. I have done a few webs jobs. My company is going to be removing a n30 and replacing with a fx60. Am I correct if the fx60 is licensed open I am able to engineer with Honeywell workbench? The communication trunks will be existing N2 devices and a new mstp bus. Or has anyone installed a web 600 with a third party N2 driver with success. I have my reasons for not installing fx workbench at this time. Inner office b.s.! Any input would be greatly appreciated.

[Chris_Worthington]

You will be good with the FX-60 and the HW WB, But not the other way around due to a brand check.

Obviously your gonna have a snatch a few modules out of the 60 to work the N2 though.

:cheers: