Help w/ model/style#....

[65cobra]

Hi, newbee to this board...I have a condenser that I would like to have decoded....I dont have the make of the condenser but here is the model and style #:

Model# NCAA029DK01
Style# 29TC704714C

Need to know the tonnage (I know i could get off the compressor, but customer not home).....Thanks and hope to be back....Mike

[hvac35tec]

sounds like a Nordyne 2.5 ton 12 seer

[65cobra]

I figure 2.5 ton also but the unit is roughly 20+ years old, so 12+ SEER is out of the question....think the 29 in the model & style # is 29K BTU??

[retired btc]

Might be a Whirlpool from 1981, 7.2 seer, 27,200 btu

[BaldLoonie]

Retired is right!

[65cobra]

Safe enough to say 30,000 BTU would suffice?
Thanks...Mike

[Jultzya]

Why not be accurate and do a load calc?

[dan sw fl]

Originally posted by jultzya
Why not be accurate and do a load calc?
Why not be even more accurate and
perform a load test!

[65cobra]

This is a condenser replacement...so customer only wants the replacement, even if the load is higher or lower....thanks...Mike