digi-cools and manifolds.........

[KLEINman]

So my 1250's are comming in tomorrow and i must say that the 2nd day shipping isnt fast enough :gah:, im excited :cheers: Im thinking about mounting them up to my imperial 4 ports. i know the match right up to the titans but IMO their a horrible manifold. What do you guys use????? Picks would be appreciated :grin2:

[yellowirenut]

I had mine mounted on the ORIGINAL Bruit...way to heavy. I found an Imperial 3 valve in the shop and have been using it for the past yr. Does the job until the Paradigm comes out.


this is the one i have.
http://www.stridetool.com/pressroom/images/715manifold_lo.jpg

[grayghost]

y j 41

[jpsmith1cm]

y j 41

Try this...

Take your YJ 41 and flip it over so the hose parks face you.

Now, install the fittings to adapt it to the DRSA.


I like this setup better than having the hose parks facing away.

[grayghost]

I will have to give it a try

[danielworkerbee]

Put the hose keepers on the front, you'll never go back to the backassway.
I use a CPS manifold with the adapter joints, I'd buy a paradigm in a second.
luck dan

[grayghost]

I have also been waiting for the paradigm.

[KLEINman]

im waiting to see what the cost is gonna bee, i know jb is coming out with a ball valve manifold also.......

[KLEINman]

im deciding between these two manifolds........

[hvac maniac]

I have it on the 4 port Imperial manifold. I've been really happy with it. You will have to use the adapters though.

[itsiceman]

So my 1250's are comming in tomorrow and i must say that the 2nd day shipping isnt fast enough :gah:, im excited :cheers: Im thinking about mounting them up to my imperial 4 ports. i know the match right up to the titans but IMO their a horrible manifold. What do you guys use????? Picks would be appreciated :grin2:
For now Y/J 41 or J/B M2
Both have a better valve and flow better with 1/4 connections than the TitanII four valve with 3/8 vacuum port (and lighter too)
Considering the J/B M4 but need to check one out first.

[KLEINman]

Oh yeaaaaaaaaa i should of bought them sooner....:cheers:
also a pic of the tseto 550's and the 1250's tied together......

[tostaos]

I have mine on the Imperial 4 port manifold and I am happy with it. Get so used to that I don't know if I will buy the paradigm when they come out.

[KLEINman]

I have mine on the Imperial 4 port manifold and I am happy with it. Get so used to that I don't know if I will buy the paradigm when they come out.

i own a lot of different manifolds, fro yj, to jb, to cps, to nrp, and imperial. I have to say that the imperials are my favorite out of all, i have the 520 series 2 ports and the 651 i believe it is 4 ports which my digi's are mounted on.:grin2:

[nratom45-70]

How well do the digicools hold up to (minor) moisture?

[jpsmith1cm]

How well do the digicools hold up to (minor) moisture?

Digi-cools will survive being dropped in a bucket of water and forgotten for several hours, as long as the cap for the sensor or the sensor itself is connected.

Minor moisture doesn't mean a whole lot to them.

[itsiceman]

Oh yeaaaaaaaaa i should of bought them sooner....:cheers:
also a pic of the tseto 550's and the 1250's tied together......Have you had much time with them?
Gotta love that bar graph Eh?

[tostaos]

Have you had much time with them?
Gotta love that bar graph Eh?I use my digi-cools for more than a year and I don't baby them, I just treat them like any other tool. No problem. The problem I have is with the clamps wire. It's too flimsy. I like the wire of the Cooper clamps and there is a thread in this forum how to replace the wire and fix the problem.

[KLEINman]

Have you had much time with them?
Gotta love that bar graph Eh?

I messed with them for 4 hours last night, I think I'm in love lol. I have them on a Liebert unit right now, so nice!!! That's bar graph is really something, I cant believe I bought the testos over these.......

[Pascone10]

I messed with them for 4 hours last night, I think I'm in love lol. I have them on a Liebert unit right now, so nice!!! That's bar graph is really something, I cant believe I bought the testos over these.......

DOES THIS MEAN I GET TO SAY I TOLD YOU SOO!!!:grin2:

[KLEINman]

DOES THIS MEAN I GET TO SAY I TOLD YOU SOO!!!:grin2:

Uuuuhhhhhh, maybe? :whistle:

[jim bergmann]

How well do the digicools hold up to (minor) moisture?

This should answer your question.

http://www.youtube.com/watch?v=cBWamNXAxIA

[jnsrose]

Hey KLEINman, nice set of digi's. Give me a call and tell me how you like them. Especially interested in that bar graph. Congrats on nationals and good luck. Tell my girl I am still stalking her.

[KLEINman]

Hey KLEINman, nice set of digi's. Give me a call and tell me how you like them. Especially interested in that bar graph. Congrats on nationals and good luck. Tell my girl I am still stalking her.

Haha i will, and thanks jnsrose, ill give you a call moday, you HAVE to buy a set! :cheers:

[nratom45-70]

Digi-cools will survive being dropped in a bucket of water and forgotten for several hours, as long as the cap for the sensor or the sensor itself is connected.

Minor moisture doesn't mean a whole lot to them.

Thanks for the info.


What's the big + with the bar graph??

[itsiceman]

It gives you sense of movement like a analog needle but way more precise.
No matter how the digital numbers roll your brain can follow with the Bar Graph.
It a little tough just looking at numbers on other digital gauges and if you are updating .5-1 sec besides missing a lot in between you are not able to read and comprehend just numbers flipping most times.

[ascj]

You know how to use that new fangled bar graph?:whistle:

I have mine on an Imperial 4 valve manifold, but couldn't take the face sticking so far out, with the adapters. Haven't had any problems with my Titans, it's been 3 years now.

Hey Kleinman......what's up with the colored hoses?

[KLEINman]

You know how to use that new fangled bar graph?:whistle:

I have mine on an Imperial 4 valve manifold, but couldn't take the face sticking so far out, with the adapters. Haven't had any problems with my Titans, it's been 3 years now.

Hey Kleinman......what's up with the colored hoses?

the hoses came with the gauges, they are non low loss, and I like the design of the shreader depressors, they have larger openings for better flow, and I have low loss fittings to put on the end if need be. I'll be picking up a vacuum tree next.......

[KLEINman]

You know how to use that new fangled bar graph?:whistle:

I have mine on an Imperial 4 valve manifold, but couldn't take the face sticking so far out, with the adapters. Haven't had any problems with my Titans, it's been 3 years now.

Hey Kleinman......what's up with the colored hoses?

your just used to seeing the black hoses on my other manifold, i might change them, idk yet.......

[Pascone10]

your just used to seeing the black hoses on my other manifold, i might change them, idk yet.......

Once you go black, you never go back!!!:grin2:

[nratom45-70]

Once you go black, you never go back!!!:grin2:

Where's a good place to buy those black hoses, they're pricey??

[tostaos]

Where's a good place to buy those black hoses, they're pricey??United Refrigeration has good hoses

[Pascone10]

United Refrigeration has good hoses

X2. URI has them hanging up. They are similar to price for the set of the colored ones. THe black hoses have ball valves, no low loss. I like that much better.

[KLEINman]

X2. URI has them hanging up. They are similar to price for the set of the colored ones. THe black hoses have ball valves, no low loss. I like that much better.

Who told you to buy those hoses :whistle:

[Pascone10]

Who told you to buy those hoses :whistle:

FLUKEman LMAO::DD:

[KLEINman]

FLUKEman LMAO::DD:

You mustn't release the secret identity......:gah:

[Pascone10]

:oops::ban:

[KLEINman]

:oops::ban:

:tussor: