new member intro

[dull]

hi everyone! i'm dull and i consider myself a "pro" even if i don't fit the criteria. i'm the maint. supv. of a large apt. complex in austin, tx. we have app. 470 goodman heat pumps that are 8-10 years old that have never been properly maintained- yaaay!!! last week i replaced 5 compressors, the week before that i replaced 3. i've been doing apt. maintenance for 2 years and ac work from day one. i've learned a ton of info from hvac-talk and i have much more to learn. thanks to everyone for sharing your knowledge!

[Texas-Tech]

welcome homie, you'll like it here.

[chuckcrj]

Welcome here!

A lot of good info on this site.

[dull]

thanks texas-tech and chuck :putergreet:

[Teck323]

Hey guys I'm new here. Finished schooling for HVAC not long ago. Currently looking to land a job in the trade. I hope to get some good help here and look forward to meeting some cool people and get some more insight on the trade.:angel:

[maxedout777]

My name is Max, I got my degree in the Hvac program at a local college in Ohio in 2005, My first two years in the field I worked on install down in Florida. Eventually work slowed and I ended up having to move back up north to Cleveland, Ohio where I'm from and actually had to take a job outside of the field for awhile because most of the Hvac companies weren't hiring. Even though I wasn't in the field I always studied and tryed to keep up on my education. After almost three years, I was finally able to get back into the field as an installer and eventually I was able to get into the service side. I got my Nate Certification this year and eventually more recently I got into an awesome opportunity with a company as a service tech. The other techs and the owner are very sharp and helpful, I have access to the info I need to become a stronger service tech and feel like I'm where I'm supposed to be. I have been on Hvac Talk for awhile but I haven't really been active, I'm trying to get more involved now and Thank God I am actually working on this stuff a lot more so I'm excited about being able to communicate with other techs. So thanks for all the helpful info on this site.

[Paul Bee]

Welcome dull!! get your posts up to 15 and apply for pro membership. There is a lot of good info in the pro section of this site.

[dull]

Welcome dull!! get your posts up to 15 and apply for pro membership. There is a lot of good info in the pro section of this site.

thanks, paul. i'm looking to replace my gauges and a few other tools so i've been doing a lot of reading in the tool section. we're short 3 guys on a 6 man team so my surfing time is short lately, but i'll get there.

[Paul Bee]

You are welcome!

[Tech23]

Welcome.

[dandyme]

welcome---------dull, you've made it to the right place



maxed-------------1st thing you need to understand

Don"t HIJACK the thread

start a new one, it's all good

[dull]

thanks again everyone for the warm welcome- you guys are so cool :)

dull

[maxedout777]

welcome---------dull, you've made it to the right place



maxed-------------1st thing you need to understand

Don"t HIJACK the thread

start a new one, it's all good

My fault Dull, good lookin dandy gonna try this again.