carrier vvt

[r2]

hey guys, what's the first screen that comes when you enter the programming mode in the vvt monitot t-stat? it's category 1 (bottom) and the options start from 10(top left)? after going to 12 why can't i back it down to 10 again. does 12 mean 1.2 the heating set point high limit?

[sonc]

1.2 means category 1, option 2. heating set point high limit.

there is only 6 options in cat 1.

http://www.xpedio.carrier.com/idc/groups/public/documents/techlit/vvt-1si.pdf

[Edited by sonc on 06-30-2005 at 03:08 AM]