copland compressor

[j carter]

i am looking for a break down for a copland compressor the model # is erfi-0310-tad or it could be epfi-0310-tad. if there is a webb site i can go to, to get this information please let me know, plan on rebuilding compressor.

[rocket]

copeland doesn't sell internal parts

you can get breakdowm + parts at
http://www.cmpcorp.com/

my advise, getting a new one would be cheaper
in lomg run

[coolprod]

Originally posted by j carter
i am looking for a break down for a copland compressor the model # is erfi-0310-tad or it could be epfi-0310-tad. if there is a webb site i can go to, to get this information please let me know, plan on rebuilding compressor.

ERF1-0310-TAD (semi-hermetic)was in 2 applications.
1) High temp R22, 35,000 btu's @+45*evap/130*condensing, 460v 3ph.

2) Med temp R502, 22,300 btu's @+20*evap/120*condensing, 460v 3ph.

[j carter]

i agree 100% but the managers budget will not allow me to do it, correction on the rebuilding ,i am only replacing the broken pistons rod, unit was found running but was not pumping. thanks for information.

[R12rules]

Even though copeland corp may not sell internal compressor parts .... there are plenty of resources for those compressor parts.
Just check with Dental Air Compressor rebuilders. These air units use Copeland semi-hermetic compressors.

Do a Google.

[rocket]

dental compressors only "K" models, and on these
the internal parts different than refrig models

jcarter, has ERF1-0310-TAD
good breakdown and parts available at
http://www.cmpcorp.com