PDA

View Full Version : need help with an old trane package rtu


topherito
03-04-2011, 01:24 AM
here is the m# sahcc6060c10c75d3d00cgflmnrtb
circuit on will not start and i have found nothing open in the circuit to keep it from starting. any help that anyone can give its kicking my butt. Thanks
saylor240
03-04-2011, 03:59 AM
you will have to learn how to read the scematic, and use a meter to trace out a open circuit.
dandyme
03-04-2011, 06:17 AM
you will have to learn to read!




New Member Introduction and Site Rules Just Joined? Be sure to pop in here and introduce yourself Register Here DO NOT POST SITE QUESTIONS HERE!!






the banner above the replies
Tech23
03-04-2011, 10:09 AM
Welcome to thte site...also read the rules that state we cannot give DIY help here...even if you are in the trade, we cannot out here in the open forums. So take a moment and read the rules and apply for pro membership so you can join us in the private forums where you can get help.

Site Rules:
http://hvac-talk.com/vbb/showthread.php?t=1241
a/c1
03-04-2011, 01:30 PM
Does the unit have an economizer and and is your circuit open in the economizer controls? Any bad molex pluggs?
Tech23
03-06-2011, 08:26 PM
Does the unit have an economizer and and is your circuit open in the economizer controls? Any bad molex pluggs?

I see you are new...welcome. Read the rules please as continuing this conversation in the introduction area will only get this thread shut down.