View Full Version : York Gas valve spring located
02-11-2011, 10:22 PM
Installing a York furnace that my friend gave me model P1XUB12V05501D. It is a 2 stages variable speed. It was previous converted to propane and now I am converting it back to gas. I have the spring but could not find the regulator screw head anywhere. When second stage kick on all I got was 1.6" WC no matter how tight I tighten the allen key. Its need to be at 3.5"wc
02-11-2011, 10:30 PM
it takes more then the spring to convert it back.
02-11-2011, 10:38 PM
I change the orifices already back to #45 it were #56
02-11-2011, 10:46 PM
This is not a diy site and we can not help you with it. If you dont no where the screw is you should not be doing this.As not doing it right and get you hurt or burn down your house. call a pro in and get it set up right.
02-12-2011, 06:39 AM
why isn't your friend doing it for you?
02-12-2011, 06:52 PM
I am is an installer, I normally install Trane. I not familiar with this White Rodgers gas valve that is why I ask for help. Gas valve is a 36E54-250. If I am not an installer how do I know about Water Column and about changing the spring and orfice
02-12-2011, 08:09 PM
i used to work with this clown that had the vocabulary down,unfortunately that's all
02-13-2011, 06:11 PM
replaced with a 36E55 221 and working perfectly
02-13-2011, 07:38 PM
If I am not an installer how do I know about Water Column and about changing the spring and orfice
A couple searches on the internet, and I could sound like I know how to fly an airplane.
An I'm not a pilot.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.