Rheem RGRL 2 stage FA furnace 1st stage v 2nd

[ccharlieromeo]

Just installed a Ruud RGRL 2 stage furnace. I have used a single stage stat with the P7 on a time for hi. This time I am using a Honeywell Pro 6000 series
(6220) stat programed for heat 2, AC 1 for over 90%. and of course W & W2 are wired.... What's the easiest way of telling what stage my system (gas valve) is in. I am not sure if its going to Hi 100%. Buy the way the P7 is set to NONE. :anyone:

[amd]

Higher airflow on second stage.

[Tech23]

Welcome to the site,

Of course due to the rules, even though you sound like you are in the trade, we cannot tell you how to work on this. Telling you how to check to see if it is in hi or lo fire would be giving DIY help out here in the open forums.

What I will say, is read page 43 of the installation manual and you will see what you are doing wrong.

Get your posts up to 15 and apply for pro membership, then you can join us in the pro forums for technical help.

Take care and good luck.