Trane PTAC dead

[repairguy]

Older Trane PTAC Model PTHD1501GAA is not working. Power is coming to the system but nothing happens when heat/cool is turned on and thermostat adjusted. New Master control panel installed (BRD03075) and fuse is good. Any suggestions? Things to check?

I don't have the wiring diagrams to check. Any help would be appreciated.

[beachtech]

sorry but we do not give out technical advice to new members.

if you are a technician, join us and become a professional member and we will gladly help you with this.

in all honesty, cost of repair versus replace on those units, is usually more ecnomical to replace them. they're a standard size system, any manu fit's the wall cavity.

[allamericanclow]

check ur wiring. I need more info to help.You have a tstat loacted on a wall? And it has power other then a battery. unplug the tstat at the unit and run it without. If you have a ptac with out a tstat then add a tstat and see if it runs...

[Tech23]

sorry but we do not give out technical advice to new members.

if you are a technician, join us and become a professional member and we will gladly help you with this.

in all honesty, cost of repair versus replace on those units, is usually more ecnomical to replace them. they're a standard size system, any manu fit's the wall cavity.

:yes:

Welcome to the site, get your posts up to 15 and apply for pro membership...wait a few weeks and if approved you will be able to get technical help in the pro forums.

Good luck and take care :CU:

[Diceman]

Its a ptac, throw it in the dumpster and sell em a new one.

[allamericanclow]

i have 300 of them if i throw away it will cost me a 180k. takes ten min to fix anyh part on them

[allamericanclow]

sorry again =