Buderus install continued

[dave72370]

Well it has been a while since I have updated the pics on the Buderus install that I was doing. Again this is a Buderus G115/34 with a Hydro-Air heat/cool air handler with a 40 gal Buderus indirect DHW. Keep in mind that the T&P overflows are not done as of the pictures, as well as the cold feed water overflow

http://www.asksmartdave.com/boiler1.jpg

These are very close quarters here. Not alot of head room of floor space
http://www.asksmartdave.com/boiler2.jpg

http://www.asksmartdave.com/boiler3.jpg

Air handler and DHW are using 1 inch type L copper and the two hydronic heat zones are using 3/4 in type L copper
http://www.asksmartdave.com/boiler4.jpg