PDA

View Full Version : Wye/delta question



licensed to chill
07-06-2010, 07:58 PM
Does anyone have a sequence of operation for a closed transition wye/delta starter assembly?

thanks

pringlel
07-06-2010, 08:18 PM
This shows a decent electical diagram, with some good info, I will look to see if i can find one that actual explains each step
http://static.schneider-electric.us/docs/Motor%20Control/Contactors%20and%20Starters,%20NEMA%20Style/Reduced%20Voltage,%20Wye-Delta/Size%206,%20Type%208630SH/50006-026-01E.pdf
also http://www.abb-control.com/pdf/catalog/lv023/3.83.pdf

Octopus
07-06-2010, 08:45 PM
http://www.google.com/imgres?imgurl=http://hvac-talk.com/vbb/image.php%3Fu%3D22414%26dateline%3D1269655086&imgrefurl=http://hvac-talk.com/vbb/showthread.php%3Ft%3D292282%26page%3D2&usg=__AY9gYIjAf36Pru1XquD5WlDPEOk=&h=113&w=150&sz=6&hl=en&start=18&itbs=1&tbnid=BBZjRevvw5ROKM:&tbnh=72&tbnw=96&prev=/images%3Fq%3Dclosed%2Btransition%2Bwye/delta%2Bstarter%26hl%3Den%26gbv%3D2%26tbs%3Disch:1

POST 16

Randy S.
07-06-2010, 09:28 PM
One thing to add:

Land the line leads on the main contactor so the jumpers don't see starting current. Replaced many toasted jumpers where they landed on the delta contactor.

deltap10
07-06-2010, 11:26 PM
Shorting contactor pulls in. No current flowing at this time. Start contactor pulls in and motor accelerates in Y. Older models time acceleration - newer models shift when cts sense a drop in amps. Shorting contactor drops out and at the same time resistor contactor and run contactors pull in. Resistor contactor is in only for duration of the shift-milliseconds. Motor is now running in Delta. Transition complete aux. contact signals control panel start is complete. Vanes begin to open in leaving chw control.

allchlrstech
07-08-2010, 11:30 PM
I HAVE SOMTHING BETTER,JUST CANT FIND IT RIGHT NOW.

pringlel
07-09-2010, 05:07 AM
I HAVE SOMTHING BETTER,JUST CANT FIND IT RIGHT NOW.

Good stuff,thanks for sharing :)

Screwit
07-09-2010, 09:15 AM
Wye delta starter sequence attached

licensed to chill
07-09-2010, 08:19 PM
Thanks for the links, answered all my questions

Doesn'tPhaseMe
07-10-2010, 09:47 AM
Here is a thread from a few months ago.
http://hvac-talk.com/vbb/showthread.php?t=516502&highlight=delta