Looking for a new type

[Dad]

...of walk in temperature alarm system.

It needs to have visual and audible alarms and easy to program. Installation and operation needs to be UN-complicated. Tamper proof would be cool too.

I have used the Control Products # TAI-2000D-24 and the Supco TA2. Not happy with either.

What do you use that may be a better product, easy to install, program, set up and will LAST

Thanks

Lusker

[icemeister]

Check these out: http://www.modularm.com/temp.html

I haven't sold any but have run across them on several jobs. They're not cheap, but you get what you pay for.

Several guys here have recommended them in the past.

[Dad]

Ice...

Sorry for my response delay. I did go to that site and you are correct about the price but they are alot nicer than the Supco TA 6 that was just approved.

I can't lock these units so I mount them on the walk in wall as high as I can and lock them up in a clear plastic stat lock box. I make a lot of money replacing plastic lock boxes :)

Thanks again for the site Ice.

If anyone else has another idea (boy, is that asking for trouble or what?) I am all eyes.

Lusker

[Dad]

Ice,

They went with Modularm #75 for this location. They want to look at #96 for the rest of their locations. (about 500 locations in US)

I have two 75's coming in overnight.

Thanks again for the tip

[icemeister]

Do I get a commission? ;):D:D

[Dad]

I wish I did!

They kept me on the phone forever. Three VP's wanting info ASAP!

Three hours later... two #75's and possible 500 # 96 or data 2 units. I had to call the president of Modularm three times to get this done. The list on one 75 is $358.00. (anyone can get that info)

The list on the 96 or data 2 units are over double that.

Don't you wish you could charge for consulting time? Any how, if anyone else reads this and you get a request to put one of these units in... send 5% of billing to me and Ice.