YT refrigerant clean up drier kit

[pringlel]

Hi all
Am looking to see if anyone has a york part number for a refrigerant drier clean up kit. ( drier shell and eductor) Any help would be appreciated thank you.

[klove]

No such thing. You have to build your own using the drier/filter of your choice and an aftermarket or York OEM eductor.

[Randy S.]

What klove said. For a nasty cleanup, you might consider a shell with replaceable cores, and multiple change outs of the core. In the winter I'd yank the whole charge and distill it, but I have access to this huge NEVA monster pumpout unit.

[pringlel]

Thank you

[york56]

What klove states is true but I did find something about the installation for it.:LOL:

[pringlel]

Very nice! Thank you

[heavymetaldad]

Make your own. Eductors (jet pumps) available at McMaster-Carr.
http://www.mcmaster.com/#jet-pumps/=7e36sj

[Randy S.]

Some have an extra tap on the drop leg, which could be used to drive a controlled amount of liquid through the drier setup, and then into the evaporator. Valves in and out, and a port downstream from the drier to fart out the noncondensibles when you change the cores. They don't always have the extra port available. I've also used a fliter drier in line with the charging hose.

Just don't create an oil trap.

[the007]

all yorks have oil-scavening lines....you can replace/repipe/rework those lines to include a replaceable core shell. if it's bad enough, i would use pleated filters to start with then move to filter/drier cores as it cleans up. another hint, put a sight glass somewhere downstream of the shell......

[pringlel]

What a wealth of information you guys are, Thank you for time and sharing your experience. Picked up alot of excellent ideas, that frankly i may not have done.