Solution Sample valve

[bertoh]

Anyone ever seen a solution sample valve like this on a YIA.
Allthe sample points are the same. Is their a trick to it , or are they plugs like they look and if so whats the best way to get a sample

[bullgear420]

I believe that you will need a spindle valve tool from York.

[bertoh]

any chance you have a part num. on it

[bertoh]

I found it in RP for the unit. Thanks bullgear
any thing I need to know about using it. Is there a check valve in the spindle valve to avoid sucking air into the machine?
TIA

[klove]

I found it in RP for the unit. Thanks bullgear
any thing I need to know about using it. Is there a check valve in the spindle valve to avoid sucking air into the machine?
TIA

No check valve. Set up as normal and evacuate before opening the valve. May not be necessary all the time, but it's good practice just in case.

[bertoh]

I have one ordered, and hope it is self explanatory. thanks klove