View Full Version : not sure
06-27-2004, 07:35 AM
hi, should evap run at about 5 degrees
06-27-2004, 11:31 AM
I think you need to post this one more time in every section, just in case somebody missed it:)
06-27-2004, 07:23 PM
saturated suction temperture should be 15 to 20 degrees below box temperture setpoint.
if you have a box that is to maintain 35 degrees lets say r12 then suction pressure should be 17 to 21 lbs.which would correlate to an evap temp of 15 to 20 degrees.
06-28-2004, 05:26 PM
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.