PDA

View Full Version : JC's NCE can manage BACNetIP device?



gavrotte
05-05-2010, 12:06 AM
I can create BACNet integration in NCE but still confused about this capable of NCE. Does anyone have any experience in using BACNet of NCE?
Thanks.

blackbelt3677
05-05-2010, 02:05 AM
NCE25 Models
The NCE25 models:
• integrate either one RS485 field bus or one LONWORKS network trunk into a
Metasys system network.
- NCE256x-x models integrate one BACnet MS/TP trunk with up to
32 MS/TP controllers.
- NCE251x-x models integrate one N2 Bus with up to 32 N2 controllers.
- NCE252x-x models integrate a single LONWORKS trunk with up to
32 LONWORKS devices.
• monitor and control up to 50 IP BACnet field devices over Ethernet at the
supervisory level
• provide an integral MS/TP Field Equipment Controller with 33 Input/Output
(I/O) points
• cannot serve as Site Director except in stand-alone applications
http://cgproducts.johnsoncontrols.com/default.aspx?main.aspx&2
rite out of the tech lit on JCI product info just google this
johnson controls product info

Good Luck!!!!

canadian_jci_guy
05-06-2010, 08:34 PM
I can create BACNet integration in NCE but still confused about this capable of NCE. Does anyone have any experience in using BACNet of NCE?
Thanks.

Yes an NCE can communicate to other BACNet IP devices. You do have to set the options under the Site under advanced Bacnet site = True, Bacnet Encoding Type = Aansi x3.4 (US-ASCII). The NCE will need to be reloaded or rebooted for these settings to take effect. So upload & route trends if you have an ADS before performing.

kontrolthis
05-06-2010, 08:50 PM
Good stuff. This is our go to controller for small rooftop and central plant controllers. Besides the normal Java and revision bs, the controller as a whole has been pretty stable for us. Then again, it's all in how you program and apply it.

berg2666
05-08-2010, 10:23 AM
I can create BACNet integration in NCE but still confused about this capable of NCE. Does anyone have any experience in using BACNet of NCE?
Thanks.


50 devices over BacNet IP....

freddy-b
05-08-2010, 11:10 AM
50 devices over BacNet IP....

50 devices over IP? Why does device count have to do with anything?

berg2666
05-08-2010, 11:35 PM
50 devices over IP? Why does device count have to do with anything?



I bet it is a memory thing.

SuperDuperTech
05-10-2010, 08:21 AM
You are not remebering or the device can not have enough memorys? Sounds like they have done a copy of a FX20 I might guess.