Outpost1969
04-30-2010, 11:23 AM
Greeting this is my first post, I am working with a Network 8000 system with 11 GCM's and over 200 LCM's controlled and monitored using BC Network 8000 on a 286 Compaq computer and 2 signal computers running Signal 4.4.1 and Signal 5.0.0.
My problem is that when I configure a new alarm it only results in an Exception. I have also been unable to configure the new alarm to work with DataTalk 4.4.1 .
If anyone out there can help or put me in contact with someone who has experience with this issue. Please email me.
I have all the Manuals disks and hardware spec's for the system on request.
I am also interested in location any training opportunities that may be out there.
My problem is that when I configure a new alarm it only results in an Exception. I have also been unable to configure the new alarm to work with DataTalk 4.4.1 .
If anyone out there can help or put me in contact with someone who has experience with this issue. Please email me.
I have all the Manuals disks and hardware spec's for the system on request.
I am also interested in location any training opportunities that may be out there.