sandyman
04-29-2010, 05:43 PM
Hello folks, my name is John Roach I graduated from Georgia Northwestern Technical College on March 24, 2010 with a Diploma in Air conditioning Technology. I had a 3.85 GPA overall. I am hardworking, Intelligent, and a fast learner. I Like to do things the right way the first time. I live in Trion, GA an hour south of Chattanooga, TN, and about 2 hours North West of Atlanta, GA. If any body in the surrounding area is seeking a promising candidate for a service tech. I would appreciate the oppurtunity.I am interested in all areas of the HVACR field. I am anxious to see where this field can take me. I am pasting a copy of my resume below. If anyone is interested I can provide references and proof of listed certificates, and skills.
I ran across this forum a few days ago , and I have to say thanks to the folks who are maintaining this site. It has been quite a joy browsing through it.
thanks to all who view this,
John D. Roach
John Roach
103 Dakota Drive
Trion, GA 30753
706-802-8737
Sandyman024@aol.com
Objective
Seeking a position in the HVACR field.
Education
Georgia Northwestern Technical College (Walker County campus); Rock Spring, Georgia
Diploma: Air Conditioning Technology, March 2010
Excellency certified in Refrigeration and Electrical through the ESCO Institute
Certified in Trac-Pipe installation
EPA Universal Certification
Certificate of achievement in residential thermostats through Carrier/Bryant
Certificate of achievement in gas furnaces through Carrier/Bryant
Experience
2007-2009; Roper Corporation; Lafayette, Georgia
Worked in cells, building ranges from the ground up. Also performed general electrical work and operated a lift truck. Productivity and time management were a must in this job.
1999-2007; Mohawk industries; Lyerly, Georgia
Dye Calculator: calculated dye and chemical quantities for the dyeing of carpet; matched dyed samples against their shade standards.
Quality Control Inspector: responsible for shipment of quality goods and holding back poor quality goods.
Beck operator: responsible for loading, sampling, and unloading of beck dye machines.
Skills
Proficient in flaring, swaging, bending, and brazing of copper tubing
Trouble shooting A/C systems, gas , and electric heating systems
Heat load calculation/system sizing through use of Manual J
Proficient in the use of electrical test equipment
Proper system charging by means of weight, sub-cool, and superheat methods
Proficient in Microsoft Word, access, and Excel
Excellent math skills
Competent in the principles of heat pump systems
I ran across this forum a few days ago , and I have to say thanks to the folks who are maintaining this site. It has been quite a joy browsing through it.
thanks to all who view this,
John D. Roach
John Roach
103 Dakota Drive
Trion, GA 30753
706-802-8737
Sandyman024@aol.com
Objective
Seeking a position in the HVACR field.
Education
Georgia Northwestern Technical College (Walker County campus); Rock Spring, Georgia
Diploma: Air Conditioning Technology, March 2010
Excellency certified in Refrigeration and Electrical through the ESCO Institute
Certified in Trac-Pipe installation
EPA Universal Certification
Certificate of achievement in residential thermostats through Carrier/Bryant
Certificate of achievement in gas furnaces through Carrier/Bryant
Experience
2007-2009; Roper Corporation; Lafayette, Georgia
Worked in cells, building ranges from the ground up. Also performed general electrical work and operated a lift truck. Productivity and time management were a must in this job.
1999-2007; Mohawk industries; Lyerly, Georgia
Dye Calculator: calculated dye and chemical quantities for the dyeing of carpet; matched dyed samples against their shade standards.
Quality Control Inspector: responsible for shipment of quality goods and holding back poor quality goods.
Beck operator: responsible for loading, sampling, and unloading of beck dye machines.
Skills
Proficient in flaring, swaging, bending, and brazing of copper tubing
Trouble shooting A/C systems, gas , and electric heating systems
Heat load calculation/system sizing through use of Manual J
Proficient in the use of electrical test equipment
Proper system charging by means of weight, sub-cool, and superheat methods
Proficient in Microsoft Word, access, and Excel
Excellent math skills
Competent in the principles of heat pump systems