PDA

View Full Version : Programmable Thermostat – Two Analog Outputs


Chukkuls
04-14-2010, 10:13 AM
I am looking for a programmable (includes time of day scheduling) thermostat with two analog outputs. I need something that can be programmed from the thermostat itself without a PDA, laptop, etc. Am I better of searching for a leprechaun and his magical pot o’ gold?



Thanks,

Chuck
ControlsInMT
04-14-2010, 10:29 AM
Try Viconics.
s2sam
04-14-2010, 12:21 PM
I am looking for a programmable (includes time of day scheduling) thermostat with two analog outputs. I need something that can be programmed from the thermostat itself without a PDA, laptop, etc. Am I better of searching for a leprechaun and his magical pot o’ gold?



Thanks,

Chuck

Good day Chuck,

I do not know what your time frame is, but we will be releasing a version of our S2UI28 this Summer that will have 2 Analog Outputs (0-10V) and 4 Binary Outputs in addition to the other goodies (Touch screen TFT display, etc). We are creating this version for one of our larger customers, as they too had problems finding a device that met all of their needs.

As for programming... it is too early to tell if we will have some rudimentary on-board programming capability so this may be a deal breaker for you. However, I just wanted to give you (and perhaps others) the heads up that another solution is in the works.

Cheers,

Sam
STC
04-14-2010, 01:29 PM
I know the Honeywell T7350M has the two modulating outputs but I can't remember if they are configurable on the stat itself. Its been a while...
Control Man
04-14-2010, 01:51 PM
TCS/Basys SZ1051 Easy to setup and very reliable.

http://www.tcsbasys.com/features.php?pn=sz1051
bobby m
04-14-2010, 04:27 PM
http://www.temcocontrols.com/?CategoryID=7
dapper
04-14-2010, 05:47 PM
Honeywell T7350 can be programmed from the stat. Depending on your application, look at the KMC Flexstats.
drafty888
04-15-2010, 12:16 PM
ALC has a "room controller" that operates in a stand-alone mode and has multiple AO's and DO's. There's quite a few built-in programs you can select from to optimize the HVAC equipment you're controlling (heat pump, unit ventilator, FCU, etc).
kontrolthis
04-15-2010, 11:52 PM
Johnson TEC stats?