Johnson DOS and Companion

[joey791]

I know there was a Dos program to program or access controllers(AHUs, UNTs programmed in the circa 1993 era. Also there was a program to pull a database out of a Facilitator Companion panel. Does anyone have a copy of either?

[beer30]

You're probably talking about Hvacpro 3.03, and Companion Panel Utilities.

[harley2003rkc]

I'll take a look around, my father says we have the database backup file here somewhere. BTW.... If your still tinkering with some of that older stuff, we still have an unopened Facilitator FMS Workstation Software Package (MM-FGW201-0) Its a PC Facilitator and graphics workstation all in one. The registration is still in the package.

[Cagey57]

I have the Companion Panel Utilities Disk (3-1/2 Floppy) that I can will give you. It may work for what you are trying to do. You will need a DTE Null Modem cable to upload/download the CPN/FAC panel. Not to mention a Laptop with a serial port and a 3.5" floppy drive !

DOS-Pro is another issue, all I have is a copy of a copy of a copy. Can't help there.

email in profile

[joey791]

Kelly, someone was nice enough to email me the Companion Utilities, have them installed on my laptop already.

I have all the aforementioned items, I'm just so snowed under right now I'm having to post a few simple threads for the respective device gurus. This, my Trane thread, the BCI integration thread, etc. I usually like to do the research myself but I have 17 projects I'm dealing with right now not counting a couple that I just mentioned in the last sentence.

Again and always guys thanks for the help.