View Full Version : reach-in conditions
05-16-2004, 07:16 PM
Got a reach-in in the shop down here in the basement.Ambient temp is 82 degrees suction pressure is any where from 10 to 5 psi, but seems to stay steady at 6 psi.head pressure is 160. Cabinet temp is 41 degrees at a higher setting at the temp control.There is mp-39 in the unit.Unit brought down for a good cleaning on the top(condensor,condensate tray, things like that).Does this sound right as far as operating pressures and temps?Thanks for any advice.
05-19-2004, 10:55 PM
suction press. too low
05-19-2004, 11:34 PM
05-20-2004, 11:18 PM
TROUBLE SHOOT FOR LEAK ,RECOVER ,REPAIR ,CHARGE,SYSTME
05-20-2004, 11:34 PM
Originally posted by condenseddave
Jeff Gordon likes to hear that(Dupont Nascar team)
05-20-2004, 11:56 PM
Isn't adding freon considered a splash and go?
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.