PDA

View Full Version : Goodman Air Handler


rubafish
03-23-2010, 11:49 AM
Thinking about putting a Goodman Air Handler in on a Trane unit to save some money. Has anyone worked with Goodman products? Any comments on there quality?

Thanks,
Rob
JAH0983
03-23-2010, 12:02 PM
If you do a search on the subject in this forum you will see this can of worms has been opened many times. If installed properly I would reccomend goodman equipment. Proper installation is key
seatonheating
03-23-2010, 12:06 PM
Thinking about putting a Goodman Air Handler in on a Trane unit to save some money. Has anyone worked with Goodman products? Any comments on there quality?

Thanks,
Rob


Matched is always the way to go, it's the only way that you have a verified and tested efficiency.

In my area, Goodman is not much cheaper, and rightly so.
Airmechanical
03-23-2010, 12:20 PM
Matched is always the way to go

:ditto:

can't stress that enough


.
Special Ed
03-23-2010, 06:05 PM
I do NOT recommend mix-&-matching brands no matter how much money you'll save. Goodman isn't designed to operate with a Trane & vice-versa.
rubafish
03-23-2010, 06:40 PM
Thanks, I think I'll go with a Trane.
wahoo
03-23-2010, 10:33 PM
Is this on a heat pump or just AC, and how old is the Trane unit? Any idea how efficient the Trane is rated?