View Full Version : Who meets your cabling needs??
03-16-2010, 04:51 PM
Just wondering who you guys get your control wire from. I have used Windy City wire up until recently. Just wondering if there is a general concensus here on where you all are getting your wire from.
03-16-2010, 05:30 PM
Something going on at Windy City? I really like the way their box / roll feeds.
I used CSC in the past.
03-16-2010, 05:51 PM
I use Windy City also
03-16-2010, 07:24 PM
We never had a problem with Windy City, I'm talkin miles of the stuff. One of there sales rep left Windy City and went to a company from Florida. We used some of the product; quality was a little short of Windy City's. Only a little short, the price didn't warrant a change. The wire footage on Windy City's cable is a big plus, if you have installers that can understand what it means they can really maximize the amount they use.
03-16-2010, 07:42 PM
We also use Windy City. Never had a problem. Metro Wire is beating down our door though. Seem like good folks.
03-16-2010, 08:40 PM
someone has a microtech software ALS204 a McQuay chiller for 2 circuits please let me know thanks
03-16-2010, 09:04 PM
Nothing wrong with Windy City. Just posing a question.
03-16-2010, 09:53 PM
Windy city smart packs, only way to go....
03-16-2010, 09:53 PM
We use Windy City.
Tried Metro; the price was right but I found some cracked jacketing during an installation. It was probably just an isolated incident, and they offered to replace the cable no charge, but it rubbed me wrong to think we just put in a couple thousand feet of cable that might crack at any time.
You've only got one chance to make a good first impression.
03-18-2010, 02:04 PM
We have been using Metro for years and never had a problem. Last month we had some cable crack and they claimed is was due to the cold weather. Maybe they are cutting corners now that the economy is down?
Anyone else have any experiance with this?
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.