Igotworms
02-23-2010, 09:03 AM
Im new to the fx field controller programming and looking for somewhere to get started, heres the sequence. There is going to be a toggle switch on the panel to change from occ to unocc.
In the occupied mode I want the supply fan to run continuously with one stage of heat maintaining a setpoint of 68 degrees. Before the stage of heat comes on, status from the fan must prove.
In the unoccupied mode, the unit will cycle to maintain a setpoint of 60.
Any help is appreciated, TIA
In the occupied mode I want the supply fan to run continuously with one stage of heat maintaining a setpoint of 68 degrees. Before the stage of heat comes on, status from the fan must prove.
In the unoccupied mode, the unit will cycle to maintain a setpoint of 60.
Any help is appreciated, TIA