Monitoring a JCI FX system through Bacnet

[stevenlogs]

I was looking for information on monitoring a JCI FX40 and approximately 30 FX14 controllers via Bacnet into an ALC system. Is there a Bacnet interface card or some other way to extract the information?

[DaveCR]

You can use BACnet IP once the FX40 has a BACnet server license installed. The license is referred to as the Enterprise Connectivity Station Pack.

[viceman]

are the fx14's bacnet ? they can also be n2

[freddy-b]

You can use BACnet IP once the FX40 has a BACnet server license installed. The license is referred to as the Enterprise Connectivity Station Pack.

I think the Enterprise Connectivity is for niagara/station to station connectivity?

I have never been on the "broadcast" end of Bacnet with AX, but I think since it has the license in it....it would not be a problem?

Someone please correct me if I am wrong.

[leaflying]

The normal BACnet feature is BACnet client and Enterprise Connectivity is to enable BACnet server (export =true).

[freddy-b]

The normal BACnet feature is BACnet client and Enterprise Connectivity is to enable BACnet server (export =true).

Thanks

[stevenlogs]

If I have 4 JSI FX40's on the same campus with FX14 controllers under them and I want to interface to an ALC system, would I have to gat an Enterprise Connectivity Station Pack for each FX40 or will one license cover them all.

[DaveCR]

Each would need a license.