PDA

View Full Version : obsolete tracer


dcummi
02-16-2010, 02:00 PM
I have an obsolete tracer programable controller 50100721 rev16. Can anybody tell me how to get on line with this. Is there special software or can I use hyperterminal?:anyone:
maxpower
02-16-2010, 04:37 PM
You might have better luck if you post this in the "Controls" section.
Welcome to the site.
Tech Rob
02-16-2010, 05:06 PM
For that model you need the can to string converter, part# CAN1234

:callpro:
dcummi
02-17-2010, 02:25 PM
I tried to find the CAN1234 without much luck, can you tell me is this a CAN bus and if it is can I use a 485 differential converter.:anyone:
Tech Rob
02-17-2010, 05:41 PM
The string is the communication bus, the can is the interface.

http://farm1.static.flickr.com/85/242673796_2c165d960f.jpg

Sorry...